DIVISIO 2000


Description

DIVISIO 2000

The DIVISIO 2000 is a semi-automatic system for stress-free depaneling of PCBs. The X- and the Y-axes are both equipped with highly dynamic linear motor technology, the Z-axis is servo-driven. Already existing product carrier adapters can easily be used with this machine. The vacuum system is optimized with the help of the Tornado-Effect.
The system offers a cost-effi cient solution for customers who wish to depanel stress-free but who do not produce such a high volume to justify the acquisition of an inline machine.
By positioning the routing axis either above or below the electrically driven rotary table the DIVISIO 2100 has the fl exibility to represent a verifi ed production process. It can therefore be used without any restrictions as back-up for the inline production. The DIVISIO 2200 is a semi-automatic depaneling system with manual load-/unloading utilizing a single shuttle system.
Using only one working area allows a higher fl exibility because the available PCB area can be increased compared to other machines. This means that the DIVISIO 2200 is especially suitable for low volume manufacturing with a high product mix. Another fi eld of application is prototyping. The DIVISIO 2300 commands the largest working area within the entire DIVISIO depaneling systems.

Routing from bottom side

  • Linear drive X,Y-Axis
  • Servo drive with ball screw for Z-Axes
  • Highest dust performance
  • Same workflow like Inline-machine
  • High dynamic
  • High accuracy

 

Routing or sawing from top side

  • Linear drive X,Y-Axis
  • Servo drive with ball screw for Z-Axes
  • High dust performance
  • High flexibility
  • High dynamic
  • High accuracy

 

NEW HMI SIMPLEX

  • Right hand appliance on touch screen
  • Navigation on right screen side
  • Functions ordered downside on screen
  • Simple and safe fault clearance
  • Combined function sides
  • Large information notifications
  • Same appearance on every ASYS machine

options:

 

 

 

Technical Data

Technical Data for the DIVISIO 2000

BROCHURE BROCHURE
DIVISIO 2000 DIVISIO 2100 DIVISIO 2200 DIVISIO 2300
Machine Configuration
Transport height 850 mm ± 50 mm 850 mm ± 50 mm 920 mm ± 50 mm 850 mm ± 50 mm
Operating side Front of the machine Front of the machine Front of the machine Front of the machine
Panel (max. LxB) 460 x 360 mm 460 x 460 mm 720 x 500 mm
Routing from top 460 x 360 mm 460 x 460 mm 720 x 500 mm
Routing from bottom 460 x 460 mm
Sawing from top in Y or X 460 x 360 mm (Option) 460 x 460 mm (Option)
Sawing from top in X and Y 460 x 360 mm (Option)
NC-Axis X/Y/Z- Axis
Panel Dimensions
Panel length 50 bis 460 mm 50 to 460 mm (508 mm) 50 to 530 mm 50 mm x 720 mm
Panel width 50 bis 360 mm 50 to 460 mm 50 to 530 mm 50 mm x 500 mm
Panel thickness 0.5 bis 4.5 mm 0.5 to 4.5 mm
Panel weight max. 4,5 kg 4,5 kg
Component height, spindle-side 8 mm; partial 18 mm 8 mm; partial 18 mm (other height on request)
Component height, adapter-side (other height on request) 40 mm (depending of fi xing pins)
40 mm; partial 70 mm
(depending of fi xing pins)
Installation Requirements
Power supply 400 V, 208 V 50 / 60 Hz, ± 10% 400 V, 208 V 50/ 60 Hz, ± 10% 400 V, 208 V 50/ 60 Hz, ± 10% 400 V, 208 V 50/ 60 Hz, ± 10%
Power supply system 3L + N + PE 3L + N + PE 3L + N + PE 3L + N + PE
Fuse protection 3 x C16 A without ELCB 3 x C16 A without ELCB 3 x C16 A without ELCB 3 x C16 A without ELCB
Power consumption 3,3 KW /4.9 kW (depending on vacuum cleaner) 3,3 KW /4.9 kW (depending on vacuum cleaner) 3,3 KW /4.9 kW (depending on vacuum cleaner) 3,3 KW /4.9 kW (depending on vacuum cleaner)
Air supply 6 bar 6 bar 6 bar 6 bar
Air consumption 120 Nl/min 120 Nl/min 120 Nl/min 120 Nl/min
Machine Description
Length x Width x Height 1320 x 1970 x 1480 mm 1620 x 2270 x 1480 mm 1000 x 1970 x 1482 mm 1880 x 2796 x 1522 mm
Weight 1150 kg ((standard equipped) ~900 kg (standard equipped)
Axis speed max. X, Y = 2000 mm/s, Z = 1000 mm/s X, Y = 2000 mm/s, Z = 1000 mm/s
Axis acceleration max. X, Y = 20 mm/s², Z = 15 mm/s² X, Y = 20 mm/s², Z = 15 mm/s²
Positioning ≤ ± 0.01 mm (20°C ± 1°C) ≤ ± 0.01 mm (20°C ± 1°C)
Repeatability ≤ ± 0.005 mm (20°C ± 1°C) ≤ ± 0.005 mm (20°C ± 1°C)
Depaneling accuracy ± 0.08 mm with Vision System (20°C ± 1°C) ± 0.08 mm with Vision System (20°C ± 1°C)
± 0.12 mm without Vision System (20°C ± 1°C) ± 0.12 mm without Vision System (20°C ± 1°C)
Noise < 75 dB(A) (possible deviations due to material mix of the panel) < 75 dB(A) (possible deviations due to material mix of the panel)