DIVISIO 3100


Description

DIVISIO 3100

The DIVISIO 3100 is based on a rigid, stable substructure of a welded steel construction. It is equipped with a X/Y/Z axis system above the transportation level. PCB positioning is done with an integrated stopper unit mounted at the X-axis. 
Therefore routing could be done at free defi nable Y-positions.
Restriction is that no waste could be handled (e.g. borders, waste corners). With the devided transport system inside the machine the PCB can be separated.
Subsequently the routed PCB can be transfered out of the machine. The manual width adjustment is done by a clamping lever.

DIVISIO 3000 Compact

  • Y-axes with high end linear motor drive
  • Servo drive with ball screw for Z-Axes
  • Axis-system on top or bottom side
  • Routing or sawing from top side
  • Routing from bottom side
  • Cuts only in Y-direction possible
  • Small footprint

 

DIVISIO 3100

  • Upgrade of the DIVISIO 3000 to the X-axes
  • X / Y-axes with high end linear motor drive
  • Servo drive with ball screw for Z-Axes
  • Routing or sawing from top
  • Small footprint

 

NEW HMI SIMPLEX

  • Right hand appliance on touch screen
  • Navigation on right screen side
  • Functions ordered downside on screen
  • Simple and safe fault clearance
  • Combined function sides
  • Large information notifications
  • Same appearance on every ASYS machine

options:

 

 

 

Technical Data

Technical Data for the DIVISIO 3000

BROCHURE

 

Machine Configuration
Transport height 850 mm ± 50 mm
Max. transport width 330 mm
Operating side Front of the machine
Panel Dimensions
Panel length 50 to 360 mm
Panel width 50 to 330 mm
Panel thickness 0.8 to 4.5 mm
Panel weight max. 4,5 kg
PCB weight max. 2,25 kg
Component height, spindle-side 8 mm; partial 18 mm (other height on request)
Component height, transport-side 40 mm
Installation Requirements
Power supply 400 V, 208 V 50 / 60 Hz, ± 10%
Power supply system 3L + N + PE
Fuse protection 3 x C16 A without ELCB
Power consumption 3,3 kW
Air supply 6 bar
Air consumption 120 Nl/min
Machine Description
Length x Width x Height 1000 x 1600 x 1580 mm
Weight 1150 kg (standard equipped)
Speed X X= 1000 mm/s
Speed Y Y= 1000 mm/s
Speed Z Z= 500 mm/s
Acceleration X -X= 10 m/s²
Acceleration Y Y= 10 m/s²
Acceleration Z Z= 15 m/s²
Positioning ± 0,01 mm (20°C ±1°C)
Repeatability ± 0,005 mm (20°C ±1°C)
Cut accuracy ± 0,08 mm with Vision System (20°C ±1°C)
± 0,12 mm without Vision System (20°C ±1°C)
Noise Level < 75 dB(A) (possible deviations due to material mix of the panel)