VEGO Dynamic TDM 06
Do you have extremely large, small or flexible printed circuit boards? You only need a simple conveyor belt or a complex automation solution?
No problem. Our handling modules adapt to your production and your product thanks to a wide range of options!
The TDM 06 walkthrough telescope gate provides an intermediate passageway through a production line with no lasting effect on the production flow. The basic model consists of a telescopic conveyor with a horizontal moving conveyor mechanism. The PCB is taken over at the inlet and the horizontal conveyor extends to hand over the PCB to the downstream system. After handover, the conveyor retracts, thus opening the passageway again. This operating mode means that the passageway is only closed during PCB handover (NO- mode). An optional conveyor with lift mechanism is also available which rises to bridge the gap to the upstream machine when the bridge conveyor is extended. In this configuration, the passageway is generally closed (NC-Mode) which allows the PCBs to pass directly through the machine and results in a considerable reduction in the cycle time.
