VEGO Dynamic AES 05 & AMS 05
Do you have extremely large, small or flexible printed circuit boards? You only need a simple conveyor belt or a complex automation solution?
No problem. Our handling modules adapt to your production and your product thanks to a wide range of options!
The unit consists of a loading and an unloading conveyor for maga-zines, a lifting axle with a magazine platform, a transfer conveyer tothe following unit and an electrically driven pusher. The conveyorsfor the Magazines are situated next to each other on the samelevel. The magazines are loaded onto the lower conveyor and transported into position on the magazine platform.
From this position the PCB’s are extracted. The empty magazine is then transported back on the parallel conveyor and stored until manually removed.
The line unloader AMS 05 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of a loading and an unloading conveyor for magazines, a lifting axle with a magazine platform, a receiving conveyer for the PCB’s from the previous unit and an electrically driven pusher. The loading and unloading conveyors are situated parallel to each. The magazines are transported over the loading conveyor onto the magazine platform. The pusher then slides the PCB’s into the magazine. The full magazine is then transported over the unloading conveyor and stored until manual removal.
