INSIGNUM 1000 Scan
| The INSIGNUM 1000 scan module is used to transfer data in a production line and thus supports the traceability process. A scanner mounted on a manual X/Y axis system is used to scan the code. The data read out is passed on to the following process unit. To reduce setup time, the system can be equipped with an electrical axis system. The position to be read is specified via the control panel. Manual adjustment is no longer required.
Our Highlights:
|
To increase flexibility in production, scanners can be integrated from above and below. In addition, speeds for transfer to process systems can be regulated.
Dual-track solutions are also available for increased productivity in production. Our OIC software solutions can be used for automatic product changeover. Via PULSEPRO the status of the system is recorded and communicated to the operator.
Your Advantages:
- Automatic width adjustment
- Double track solution
- Control mode
- Good/bad sorting
- Manual or electric scanner axis at the top
- Manual or electric scanner axis at the bottom
Machine Configuration
Transport height
Max. transport width
Interface
Transfer direction
Operating side
Fixed rail
Panel Dimensions
Panel length
Panel width
Panel thickness
Panel weight
Scan area above
Manual
Electrical
Scan area below
Manual
Electrical
Installation Requirements
Power supply
Power supply system
Power consumption Air supply
Air consumption
Machine Description
Length × Width × Height
Weight
Noise Level
Typ 1
920 mm ± 50 mm 460 mm
SMEMA, Siemens
From left to right / from right to left
Front of the machine
Front of the machine
70 to 460 mm
50 to 460 mm
0.5 to 4.0 mm
To 3 kg
340 x 400 mm
300 x 400 mm
290 x 400 mm
260 x 400 mm
230 V / 115 V, 50 / 60 Hz, ± 10%
L1 + N + PE
0.31 kW 6 bar
3 Nl/min
530 × 945 × 1266mm
Approx. 90 kg
minore di 75 dB
Typ 2
920 mm ± 50 mm 460 mm
SMEMA, Siemens
From left to right / from right to left
Front of the machine
Front of the machine
70 to 460 mm
50 to 460 mm
0.5 to 4.0 mm
To 3 kg
410 x 400 mm
370 x 400 mm
360 x 400 mm
330 x 400 mm
230 V / 115 V, 50 / 60 Hz, ± 10%
L1 + N + PE
0.31 kW 6 bar
3 Nl/min
600 × 945 × 1266mm
Approx. 110 kg
minore di 75 dB
Typ 3
920 mm ± 50 mm 460 mm
SMEMA, Siemens
From left to right / from right to left
Front of the machine
Front of the machine
70 to 508 mm
50 to 460 mm
0.5 to 4.0 mm
To 3 kg
460 x 460 mm
460 x 460 mm
460 x 460 mm
460 x 460 mm
230 V / 115 V, 50 / 60 Hz, ± 10%
L1 + N + PE
0.31 kW 6 bar
3 Nl/min
790 × 945 × 1266mm
Approx. 140 kg
minore di 75 dB
