Home 5 Prodotti 5 InJet 388 CD

InJet 388 CD

InJet 388 CD is dedicated for clean stencils and squeegees.

InJet® 388 CD is a basic cleaning solution for removal of solder pastes from stencils, squeegees and one-sided misprints.

It can be also used to clean PumpPrint.

The InJet® 388 CD is a 100% closed-loop system which includes cleaning and drying technologies. All of the processes are fully automated, and take place in one process chamber.

The detergents are mainly water-based but solvents can also be evaluated upon request.

Spray-In-Air vertical washing minimizes the shadow effect commonly seen in horizontal cleaning systems, and maximizes the efficiency of the process by spraying the detergent directly on the surface to be cleaned.

InJet 388 CD is a system placed on wheels to facilitate its positioning and can be easily installed in the production area.

All washing processes can be monitored and archived.

Technical specifications

  • Dimensions: (l x l x h) 1050 x 1360 x 2400 mm
  • Weight: 420 kg
  • Energy consumption per cycle: 1,5 kWh
  • Cleaning fluid consumption per cycle: 0,05 – 0,2 l
  • Compressed air consumption per cycle: 900 l/cycle
  • Max. dimensions of the cleaned parts: 190 x 800 x 760 mm
  • Max. dimensions of the cleaned part with used air knife: * 100 x 800 x 760 mm
  • Exchangeable mechanical filter of cleaning fluid: 5 – 200 μm
  • Operating pressures: 1,5 – 2,8 bar
  • Cleaning fluid flow rate: 200 l/min
  • Temperature range setting of the cleaning fluid: From ambient temperature to 60°C
  • Temperature range setting of the drying: From ambient temperature to 80°C
  • Noise level: < 70 dB
  • Device control PLC + touchscreen Monitor: 5,7“ (Option Industrial PC)
  • Volume of the storage tank: 75 l

* Air knife is optional accessory.

Vuoi maggiori informazioni sui nostri prodotti?