Home 5 Prodotti 5 InJet 388 CRD 2PR

InJet 388 CRD 2PR

InJet 388 CRD 2PR for clean: stencils, squeegees, misprints e PCBA post reflow.

InJet 388 CRD 2PR is a completely stainless steel vertical Spray-In-Air cleaning system.

Designed for combined washing of: stencils, squeegees, misprints and PCBA post reflow.

It can also be used for PumPrint after laboratory verification.

InJet 388 CRD 2PR is 100% closed loop system where the cleaning stages: washing, rinsing and drying take place in a single chamber. The optimal temperatures can be set according to the needs of the process. The detergents are mainly water-based but solvents can also be evaluated upon request.

Vertical Spray-In-Air washing minimizes the shadow effect commonly seen in horizontal cleaning systems, and maximizes the efficiency of the process by spraying the fluids: detergent and ID water, directly onto the surface to be cleaned.

Motorized cleaning arms take under control the rotation speed of spray.

The carbon and resin filters, control the ionic contamination of rinsing ID water up to 1 uS/cm.

To facilitate its positioning InJet 388 CRD 2PRis a system placed on wheels.

Thanks, the connection with the company aspiration, InJet 388 CRD 2PR can be installed in the production area.

Washing processes can be monitored and achieved by connecting with unique IP address at the internal PC.

Technical specifications

  • Dimensions: (l x l x h) 1200 x 1390 x 2400 mm
  • Weight: 450 kg
  • Energy consumption per cycle: 2,5 kWh
  • Cleaning and rinsing fluid consumption per cycle: 0,05 – 0,3 l
  • Max. dimensions of the cleaned parts: 190 x 800 x 760 mm
  • Max. dimensions of the cleaned parts with used air knife: 100 x 800 x 760 mm*
  • Exchangeable mechanical filter of cleaning and rinsing fluid: 5 – 200 μm
  • Operating pressures cleaning: 1,5 – 2,8 Bar, rinsing: 0,3 – 1,5 Bar
  • Cleaning fluid flow rate: 200 l/min
  • Temperature range setting of the cleaning and rinsing fluid: From ambient temperature to 60°C
  • Conductivity range settings of the rinsing fluid in the tanks: 0–2000 μS/cm – Optional
  • Temperature range setting of the cleaning and rinsing fluid: From ambient temperature to 80°C
  • Noise level: < 70 dB < 70 dB
  • Cleaning system control PLC + touchscreen PLC: 8,4“ (Option Industrial PC)
  • Volume of the storage tanks: 60 l

* Air knife is optional accessory.

Vuoi maggiori informazioni sui nostri prodotti?