Home 5 Prodotti 5 InJet® 388 DOUBLE TRIPPLE CRRD


InJet® 388 DOUBLE TRIPPLE CRRD Very High-Capacity PCBA cleaning after soldering

InJet® 388 DOUBLE TRIPPLE CRRD is developed for Very High-Capacity and precise PCBA cleaning after soldering.

The cleaning system can also be used for the high-capacity removal of solder pastes and SMT adhesives from stencils, PumPrints, squeegees and misprints.

All of the processes are fully automated, and take place in 3 process chambers. Cleaning takes place in the first inlet chamber, after which the cleaned part is automatically transported to the central chamber where the first rinsing process takes place. The third, and last, outlet chamber is designed for the final rinsing and the drying process.

All 3 chambers can be used in parallel, which increases machine’s capacity and reduces cross-contamination when compared to single-chamber devices. The machine has two positions on the PCB frame (two slots), which means that at full capacity, 6 frames with PCB are simultaneously processed.

With the double carbon and resin filters, it can control the ionic contamination of pre rinsing and final rinsing ID water up to 1 uS/cm.

To facilitate its positioning in the production area, the machine is placed on wheels.

All washing processes can be monitored and archived.

Technical specifications

  • Dimensions: (l x l x h) 1710 x 3200 x 1930 mm
  • Weight: 1500 kg
  • Energy consumption per cycle: 3,14 kWh
  • Cleaning and rinsing fluid consumption per cycle: 0,05 – 0,3 l
  • Compressed air consumption per cycle: 1 lt / 5 Bar
  • Max. dimensions of the cleaned parts: 100 x 810 x 740 mm
  • Exchangeable mechanical filter of cleaning and rinsing fluid: 5 – 200 μm
  • Spraying pressure – cleaning: / 45°C 1,6 Bar*
  • Range pressure – cleaning: / 45°C 0,3 – 2,8 Bar
  • Range pressure – pre rinsing: / 45°C 0,0 – 1,5 Bar*
  • Range pressure – rinsing: / 45°C F 0,1 – 1,5 Bar*
  • Cleaning fluid flow rate: 200 l/min
  • Temperature range setting of the cleaning and rinsing fluid: From ambient temperature to 60°C
  • Conductivity range settings of the rinsing fluid in the tanks: 0 – 2000 μS/cm * optional
  • Temperature range setting of the drying: From ambient temperature to 80°C
  • Noise level: < 70 dB
  • Device control PLC: + 8,4“ touchscreen PLC + 8.4“ touchscreen
  • Volume of the storage tanks: 150 l

* Values may vary depending on equipment (filters, pumps).

Vuoi maggiori informazioni sui nostri prodotti?