Home 5 Prodotti 5 InJet® 888 CRRD-1F

InJet® 888 CRRD-1F

InJet® 888 CRRD-1F for PCBA post reflow.

The InJet® 888 CRRD-1F is designed primarily to remove flux residues from PCBA post reflow.
The designation 1F indicates a 1-floor solution, primarily intended for cleaning larger parts.
Due to its large process chamber, the system has a large capacity basket designed for an easy loading and unloading of the cleaned parts.
The basket can be pulled out of the cleaning chamber on built-in rails or onto a separate loading and handling trolley.
All of the processes are fully automated, and take place in one process chamber.
It is possible to insert and clean a stencil or misprints at the same time.
To facilitate its positioning in the production area is placed on wheels.
With the carbon and resin filters, it can control the ionic contamination of pre rinsing and final rinsing ID water up to 1 uS/cm.
All washing processes can be monitored and archived.

Technical specifications

  • Dimensions: (l x l x a) 1620 x 1400 x 2350*mm
  • Weight: 775 kg
  • Energy consumption per cycle: 3,3 kWh
  • Cleaning and rinsing fluid consumption per cycle: 0,2 – 0,5 l
  • Compressed air consumption per cycle: 1500 l/cycle
  • Max. dimensions of the cleaned parts: 850 x 800 x 600 mm
  • Exchangeable mechanical filter of cleaning and rinsing fluid: 5 – 200
  • Spraying pressure – cleaning – without FC: 1,8 Bar
  • Spraying pressure – cleaning – with FC: 1,1 – 2,2 Bar
  • Operating pressures frequency converter: 2,4 Bar
  • Cleaning fluid flow rate: 210 l/min
  • Temperature range setting of the cleaning and rinsing fluid: From ambient temperature to 60°C
  • Conductivity range settings of the rinsing fluid in the tanks: 0 – 2000 μS/cm * optional
  • Temperature range setting of the drying: From ambient temperature to 80°C
  • Noise level: < 70 dB
  • Device control PLC + touchscreen PLC: 8,4”.
  • Volume of the storage tanks: 85 l 22,4

* Maximum dimension in operating condition

Vuoi maggiori informazioni sui nostri prodotti?