Description

 

VEGO Compact VEGO Dynamic

Flip / Turning

Flip / Turning

FLIP SYSTEM

BFS 01 Flip Station

WS 01 Flip Station

WSQ 01 Flip Station

The  Flip Station is used to invert PCBs 180°. This flip function will change the leading and trailing edge. The incoming PCB is mechanically stopped on the conveyor system and flipped over by a rotating system. After completion of the process the PCB is offloaded to the downstream system.

  • Pneumatic Flip mechanism
  • Transport height 950 mm +/-50 mm
  • 180° Flip Function
  • Pass-through
  • Start-Stop push button
  • ESD conveyor belts

OPTIONS

  • Transport height 850 mm ± 50 mm
  • Electrical width adjustment
  • RAL Color
  • In-/outlet conveyor 530 mm with cover

UPGRADES

  • Control panel
  • Automatic width adjustment a)
  • Additional interface protocol (Siemens)
  • Machine networking via IC-Net
  • Light tower with buzzer

a) only in combination with Control panel

 

The WS01 is used to flip PCBs in production lines for backside assembly or marking. The PCB are halted with a stopper and the complete transport mechanism flips around 180° in the direction of transport.
The PCB is subsequently handed over to the downstream machine.

Functions / Setups

  • Flip 180°
  • Pass through
Flip axis in base position 0°

Flip axis in base position 0°

Axis flips 180°

Axis flips 180°

Handover the PCB to n+1

Handover the PCB to n+1

Additional setups (optionally)

  • Automatically turn (controlled by external signal)
  • LP-withdrawal (Double turn)
  •  

OPTIONS

  • Transport height 950mm +/- 50mm
  • Automatic width adjust
  • Automatic pass-through/flip mode
  • Inlet/outlet conveyor
  • Safety shutter at the inlet and/or outlet
  • Equipment for thin PCBs (< 0.7mm)
  • PCB weight up to 6kg
  • PCB take-back function

The WSQ 01 is used to flip PCBs in production lines in 180° across the transport direction.

  • Adjusted for fix PCB width size
  • Servo driven axis
  • Flip procedure in both directions (0° and 180°) allows short cycle time.
  • Cycle time < 12 sec

OPTIONS

  • Variable PCB width can be realized with electrical and automatic width adjustment
  • During the flip procedure both conveyor rails are shifting sideways depending on PCB width. (Fix rail change)
  • Cycle time < 12 – 18 sec. Depending on PCB width. 

 

TURNING SYSTEM

BTT 01 Turn Table

AEM 02 Turn Table, T-Controller

The Turn Table is typically located in a SMD line which requires a 90 degree turn or a sorting function.

  • Up to three transfer sides
  • Pneumatic rotation
  • Transport height 950 mm +/-50 mm
  • ESD conveyor belts
  • In-/outlet conveyor 530 mm with cover
  • Start-Stop push button

OPTIONS

  • Transport height 850 mm ± 50 mm
  • Electrical width adjustment
  • Pass through
  • Good/bad sorting
  • RAL Color
  • In-/outlet conveyor 530 mm with cover b)

b) max. two loading/unloading conveyors

UPGRADES

  • Control panel

  • Automatic width adjustment a)
Width adjustment by spindles electrically driven (option)

Width adjustment by clamping lever (Standard feature)

Width adjustment by spindles electrically driven (option)

Width adjustment by spindles electrically driven (option)

  • Additional interface protocol (Siemens)
  • Machine networking via IC-Net
  • Light tower with buzzer

a) only in combination with Control panel

The AEM 02 is used for changing the direction in production lines. Subsequently, it can also be used to split or combine lines. The integrated rotating and linear drive means that the system provides you with great flexibility. The machine is based on a stable steel tubing system which can support up to 4 additional inlet/outlet conveyors.
The assembly is taken over onto the inlet conveyor and depending on the selected operating mode, is either turned or transported in a straight line through the machine to the corresponding downstream system.

  • Rotatably mounted console for operating from 2 sides
  • Operator panel type AOPT350 with graphical color display
  • Changing Parameters and setup new recipes during automatic mode
  • Password protected userlevel (configurable)
  • Product memory function

OPTIONS

  • Transport height 950mm +/- 50mm
  • Electric width adjust
  • Automatic width adjust
  • Loading lift for magazines

  • Inlet/outlet conveyor
In /out - let conveyor

In /out – let conveyor

  • Sorting function (Good/Bad, Top/Bottom)
  • Safety shutter at inlet and/or outlet)
Shutter closed

Shutter closed

Shutter open

Shutter open

  • 2 colour signal lamp (LED)
  • Inspection function
  • Speed regulation for oven transfer
  • +/- 90° mode

 

 

 

 

 

 

Technical data

VEGO Compact VEGO Dynamic
Flip Station
BFS 01 WS 01

WS 01Q

BFS 01

 

WS 01  WSQ 01
Turning Table
BTT 01 AEM 02
BTT 01

 

AEM 02      Presentation
Standard features

  • Transport height 950 mm +/-50 mm
  • SMEMA interface
  • ESD conveyor belts conform to IEC61340-5-1
  • 3 mm edge support
  • Format size 70 – 460 mm (length) x 50 – 460 mm (width)
  • Conveyor speed ~ 20 m/min.
  • PCB weight up to 3 kg.
  • Transport direction Left – Right (fix rail front)
  • Color “Basic light”

 

Standard features

  • Transport height 850 mm +/-50 mm
  • SMEMA interface
  • ESD conveyor belts conform to IEC61340-5-1
  • 3 mm edge support
  • Format size 70 – 460 mm (length) x 50 – 460 mm (width)
  • Conveyor speed ~ 20 m/min.
  • PCB weight up to 3 kg.
  • Transport direction Left – Right (fix rail front)
  • Color “Basic light”

 

Options

  • Electrical width adjustment
  • Automatic width adjustment
  • Transport height 850 mm ± 50 mm
  • Safety cover with lock
  • Transport direction from right to left

 

 

 

Options

  • Transport height 950mm +/- 50mm
  • Magazine adaptation
  • Multiple output
  • Re-insertion mechanism
  • Hybrid magazine
  • Electric width adjust
  • Automatic width adjust
  • Dual-lane operation
  • PCB weight up to 6kg
  • Equipment for thin PCBs (<0.7mm)
  • Transport direction from right to left
  • input/output conveyor