Description

VEGO Compact VEGO Dynamic
BCO 01 / BCO 02 / BCO 03 / BRS 03 TRM 01 / TRM 02 / TRM 03 / TRM 05 / TRM 06

 

  • Available length: 530 mm / 1060 mm / 1590 mm
  • Segment length: 530 mm
  • Transport height SMEMA 950 mm +/-50 mm
  • ESD conveyor belts

 

 

  • No cross shaft, two DC drives
  • Support edge 3 mm
  • Lead in / Lead out
  • Start / Stop push button

  • Different segment lengths available
  • Frame cutout for optional integrated  ergonomic workstation (only for  machines of length 1000 mm or more)
  • Serial standard contains brackets for optional footrest and lamp assembly
  • Lockable inlet for emptying the conveyor or manual insertion of PCB‘s

  • Mechanic built from anodized aluminium
  • Rails made of nickel plated steel
  • In-/ outlet guides are hard- coated
  • Edge support adjustable from 2 – 4 mm
  • Tool- free belt change
  • ESD compliant conveyor belts
  • DC- Drive motor

Options/Upgrades

 

 

a) only in combination with Control panel

Options/Upgrades

Available length:

Segment length: 530 mm

  • BCO 01 = 1×530 mm = 530 mm
  • BCO 02 = 2×530 mm =1.060 mm 
  • BCO 03 = 3×530 mm = 1.590 mm
  • BRS 03 = 3×530 mm = 1.590 mm

Available length:

Segment length: 530 mm ( standard)

Segment length: 200 mm, 318 mm, 400 mm, 500 mm, 600 mm,700 mm,730 mm,750 mm,790 mm,800 mm,1.000 mm ( alternative)

  • TRM 01 = 1×530 mm = 530 mm
  • TRM 02 = 2×530 mm =1.060 mm 
  • TRM 03 = 3×530 mm = 1.590 mm
  • TRM 04 = 4×530 mm = 2.120 mm
  • TRM 05 = 5×530 mm = 2.650 mm
  • TRM 06 = 6×530 mm = 3.180 mm

Manual Width Adjustment (Standard)

Ball-bearing guides on hard-chrome shafts

  • Manual adjusting of the PCB widht by clamping lever
  • Maintenance free and low backlash

Electrical Width Adjustment 

  • Width adjustment by electrical driven spindles.
  • Setting by the cursor buttons on the operator panel

 

Maintenance- free ball screw spindles, motor driven

Automatic Width Adjustment 

  • In addition to option „electrical width adjustment“
  • Setting by absolute value input at the operator panel
  • Width offset adjustable (standard is 0,6 – 0,8 mm)
  • Getting the width from n-1 (available with the additional option „IC-Net“)

Process control 0-99

  • Adjustable inspection counter from 0 – 99 
  •  Displaying the counter level
  •  Inspection segment configurable
  •  Illuminated confirm button

Hinged dust / Safety Cover

  • Hinged ESD- cover (dust cover)
  • Hinged ESD- cover with safety switch for interruption of n-1 / n+1 machine

+

Slide Cover 

  • Variation as three-part slide cover
  • With-/ without safety switch

Lift Mechanism

  • The PCB is lifted up by two thin metallic sheets and holded by metal pins from the side.
  • The PCB can now be removed or introduced back into the process line by pressing the confirm button.
  • During one PCB is lifted, others can pass underneath.
  • Lift mechanism optionally
    • -To outfeed “faulty” PCB’s after AOI or SPI
    • -For sample inspection (adjustable insp counter  0 – 99)
  • Lift segment selectable
  • Up to 3 lift mechanism (at TRM 03)

 

Work Station Package 

 Could be include the following parts:

  •  Illumination unit
  • ESD worktable with cutout
  • Footrest
  • Bin- holder
  • PCB inspection function 0-99

Pin Chain Conveyor

  • Pin chain conveyor instead of belt conveyor
  • For heavy housings or frames
  • For very hot components
  • Extended component clearance on bottom (additional option)

Control panel

  • Operator panel with graphical color display
  • Changing parameters and setup new recipes during automatic mode
  • Password protected user level (configurable)
  • Product memory function


 

Cleaning System

Adhesion Cleaner

Option for cleaner using an adhesive roller. Cleaning unit by Teknek

Option ABU 01

Option brush cleaning module with integrated ionization. Cleaning unit by Dr. Escherich

Machine ACS 01/02

Inline ionization cleaner. Cleaning unit by Simco

Combining an adhesion and an adhesive roller, the cleaning takes place in during running operation with no reduction in the transport speed or cycle times.

  • Possible to mount on TRM 01 basis module
  • ESD cover
  • Many different fixtures are possible

  • Height of brush station is adjustable. Entire mechanism is mounted on a hinge so it can be lifted and locked in position.
  • Transport width 300mm, other widths on request.
  • Ionisation before and after cleaning
  • Exhaust tube diameter D = 55 mm
  • Pressure rollers for PCB stability
  • Air pressure supply max. 6bar
  • Option for cleaning the upper side of the PCB
  • Adjustable transport speeds
  • Possible on TRM 01 with lengths 530/790mm

Inline ASYS ionization cleaning system for thorough cleaning of PCBs and also for cleaning of process related dirt (e.g. routing, sawing or press-in processes) and considerable reduction of static electricity (from +/- 10kV down to +/-100V) on PCBs.

  • ACS 01 with two segments L=1060mm
  • ACS 02 with one segment L=530mm

The adhesion roller, installed directly above the conveyor, removes the surface dirt from the PCB and transfers the dirt to an adhesive roller situated directly above

  • ROTORCLEAN is a compact cleaning system which removes and disposes of dust and dirt particles from the surface of the product.
  • Any static on the surface of the PCB is neutralised and the dirt is brushed off and fed out into the cleaning station.
  • Special integrated flat air nozzles help to ensure an efficient cleaning process.

The product is transported into the machine and is transported under (over and through is also possible) the ionization unit. The ionization unit produces ions, which are electrically charged atoms and molecules. Additional high pressure air is pumped at intervals onto the PCB to further optimize the process. The freed dust particles are then vacuumed away.

 

Technical data

VEGO Compact VEGO Dynamic
BCO 01 / BCO 02 / BCO 03 / BRS 03 TRM 01 / TRM 02 / TRM 03 / TRM .. / STM 03 / VL 01 / ACS 02
BCO 01 BCO 02 BCO 03 BRS 03 TRM 01 Working Station Shuttle STM03 Shuttle STM03-D
Vertical Lift VL01 PCB Cleaner ACS 02
Standard features

  • Transport height 950 mm +/-50 mm
  • SMEMA interface
  • ESD conveyor belts conform to IEC61340-5-1
  • 3 mm edge support
  • Format size 70 – 460 mm (length) x 50 – 460 mm (width)
  • Conveyor speed ~ 20 m/min.
  • PCB weight up to 3 kg.
  • Transport direction Left – Right (fix rail front)
  • Color “Basic light”

 

Standard features

  • Transport height 850 mm +/-50 mm
  • SMEMA interface
  • ESD conveyor belts conform to IEC61340-5-1
  • 3 mm edge support
  • Format size 70 – 460 mm (length) x 50 – 460 mm (width)
  • Conveyor speed ~ 20 m/min.
  • PCB weight up to 3 kg.
  • Transport direction Left – Right (fix rail front)
  • Color “Basic light”

 

Options

  • Inspection function 0/1
  • Adjustable handover speed
  • Electrical width adjustment
  • Transport height 850 mm ± 50 mm
  • Hinged dust cover 530 mm
  • Hinged dust cover, with Interlock
  • Rail extension
  • Stopper cylinder
  • Scanner mounting bracket with trigger, topside

 

 

 

Options

  • Transport height 950mm +/- 50mm
  • Electric width adjust
  • Automatic width adjust
  • Inspection function 0-99 with display
  • Inspection frequency and current counter reading.
  • Configurable inspection segment. Inspection period can
    be limited with timeout
  • Adjustable speed
  • Hinged ESD cover
  • Hinged Safety ESD cover with interlock for disabling of
    upstream/downstream systems
  • PCB weight up to 6kg
  • Workstation upgrade
  • Pin lift mechanism including good/bad sorting function
  • Upgrade for thin PCBs (< 0.7mm)
Available length:Segment length: 530 mm

  • BCO 01 = 1×530 mm = 530 mm
  • BCO 02 = 2×530 mm =1.060 mm
  • BCO 03 = 3×530 mm = 1.590 mm

 

 

 

 

Available length:

Segment length: 530 mm ( standard)

Segment length: 200 mm, 318 mm, 400 mm, 500 mm, 600 mm,700 mm,730 mm,750 mm,790 mm,800 mm,1.000 mm ( alternative)

  • TRM 01 = 1×530 mm = 530 mm
  • TRM 02 = 2×530 mm =1.060 mm
  • TRM 03 = 3×530 mm = 1.590 mm
  • TRM 04 = 4×530 mm = 2.120 mm
  • TRM 05 = 5×530 mm = 2.650 mm
  • TRM 06 = 6×530 mm = 3.180 mm