Göpel X Line · 2D


Description

X-Ray Inspection with X Line · 2D

The X Line · 2D allows high-speed inspection of assemblies populated on one side. The intelligent 2D technology is completely free from typical distortions. This allows consistent component testing at any point in the image field.

By combining X-ray inspection (AXI) with an AOI module, inspection tasks can also be carried out which are not possible using X-ray alone (AXOI). If required, the X Line 2D can be upgraded at any time to a 3D system for assemblies populated on both sides.

 

Programming Software – PILOT AXI

… a software for AXI test program generation. The inspection process wizard allows fast and intuitive programming. The offline programming concept reduces machine downtimes.

  • extensive AXI/AXOI component library
  • CAD data import (ODB++, GenCAD, Gerber data, insertion data)
  • integrated debugging statistics for fast optimization of inspection programs
  • full offline programming away from the production line
  • intelligent data management for storing test results
  • numerous test functions for X-ray and AOI inspection

Machine Control Software – PILOT Inspect

… a machine control software for unified control of GOEPEL electronic inspection systems. The touch screen operating concept for accessing apps provides intuitive handling as well as clear and structured presentation of the most important information.

  • operation and control of inspection systems via system PC as well as on mobile devices
  • short training time through integrated information texts and video tutorials
  • software based on various apps (for example inspection, fault statistics, calibration, machine state)
    • status display on PILOT Inspect start page
  • reduced machine downtimes through targeted fault diagnosis with status display and troubleshooting hints
  • interaction with sofware module Pilot Connect
  • communication with MES systems

Image capturing chain: X-ray tube

  • Microfocus x-ray tube
  • Spot size: typ. 5µm – 10µm
  • Sealed type, maintenance free
  • Max. voltage: 130kV
  • Max. current: 300µA  

 

Technical Data

AXI · Technology
X-ray inspection

X Line · 3D, X Line · 2D

BROCHURE
System
in-line interface SMEMA, Siemens
device connections 230 VAC, 1 kVA, 6 bar compressed air, < 20 Nl/min *
typical power consumption < 700 W (average)
dimensions (wxdxh) base unit: 1596 mm x 1540 mm x 1470 mm device with tube tower: 1596 mm x 1540 mm x 1720 mm
weight approx. 2.5 t
PCB handling
transport height 850 mm – 950 mm ± 25 mm
width adjustment automatic
PCB size (lxw) max. 450 mm x 400 mm – min. 60 mm x 50 mm
PCB thickness 0.5 mm – 5 mm
PCB contact width ≥ 3 mm
PCB weight ≤ 1.5 kg
PCB deflection automatic compensation (laser)
component clearance of PCB below: 65 mm –  above: max. 40 mm
handling time approx. 5 s (parallel loading/unloading and inspection)
X-ray technology
tube type zero-maintenance, sealed micro-focus X-ray tube
tube voltage max. 130 kV
tube current max. 300 μA
tube output max. 39 W
detector type multi-angle detector, real-time image capture from different angles
grey-scale resolution 12 bits
detail resolution variable: 6 μm – 24 μm
3D process digital tomosynthesis
3D inspection speed X Line · 3D X10: up to 10 cm²/s
X Line · 3D X40: up to 40 cm²/s  |  X Line · 3D X40PLUS: > 40 cm²/s
calibration geometric and grey-value calibration, automatic stability monitoring 3
z-axis adjustment customisable geometrical magnification by means of motorised vertical positioning of the tube
X-ray protection in accordance with the German X-ray Ordinance RöV, three segments, radiation-proof, zero emissions
Optical image capture technology
resolution 21 μm
field of view 42 mm x 42 mm
lens telecentric (pixel-adaptive objective)
lighting multi-spectral lighting, selectable from blue to IR