Description

Category:

Technical Data

Sonix® 355 CRRD  Sonix® 954 CRD Piano
Technical Data
Dimensions (w x l x h) 1360 x 972 x 1243 mm 2342 x 1132 x 1703 mm
Weight  400 kg 740 kg
Ø energy consumption per 1 cycle  1,92 kWh 2,67 kWh
Compressed air consumption per 1 cycle  83 l / 5 Bar 83 l / 5 Bar
Max. dimensions of the cleaned parts  280 x 560 x 570 mm 900 x 470 x 300 mm
Dimensions of mechanical carrier basket 260 x 460 mm 880 x 450 mm
Exchangeable mechanical filter of  fluids  NA 5 – 100 μm
Temperature range setting  cleaning fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting   rinse  fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting  drying  From A. T. to 90°C From A. T. to 80°C
Conductivity range settings of the rinsing   NA 0 – 200 μS/cm
Noise level < 70 dB < 70 dB
Device control PLC + 5,7“ touchscreen PLC + 8,4“ touchscreen
Traceability Off/In Line Options Options
External rinsing set dimensions (w x l x h) NA Options 1000 x 1500 x 1100 mm 100 litres

 

Sonix®

Sonix is a fully automatic system with two different setups including multi-chamber option. Itś designed to clean all types of conformal coating from coating frames, masks, pallets, parts of the coating line, or PCB.

Sonix® 355 CRRD

     

Sonix® 355 CRRD

Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, coating machine parts of coated PCBs for repair and subsequent coating.All processes are automated and run in 4 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then the operator manually moves the basket with the washed parts to the secondary pre-rinse chamber. The operator then moves the basket to the final rinse chamber and finally to the last drying chamber.All 4 chambers can be used at the same time, which increases the cleaning capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.

Sonix® 954 CRD Piano

     

     

 

Sonix® 954 CRD Piano

Sonix® 954 CRD “Piano” is designed to remove the cured conformal coating from coating frames, coating machine parts or coating PCBs for repair and subsequent coating. In certain cases, Sonix® 954 CRD “Piano” may also be recommended for PCB cleaning or for degreasing metal parts.All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with cleaning liquid and the other with rinsing liquid. The operator puts the parts to be cleaned in the process chamber into the basket, and the cleaning system automatically performs the cleaning, rinsing and drying process.

 

Technical Data

Sonix® 355 CRRD  Sonix® 954 CRD Piano
Technical Data
Dimensions (w x l x h) 1360 x 972 x 1243 mm 2342 x 1132 x 1703 mm
Weight  400 kg 740 kg
Ø energy consumption per 1 cycle  1,92 kWh 2,67 kWh
Compressed air consumption per 1 cycle  83 l / 5 Bar 83 l / 5 Bar
Max. dimensions of the cleaned parts  280 x 560 x 570 mm 900 x 470 x 300 mm
Dimensions of mechanical carrier basket 260 x 460 mm 880 x 450 mm
Exchangeable mechanical filter of  fluids  NA 5 – 100 μm
Temperature range setting  cleaning fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting   rinse  fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting  drying  From A. T. to 90°C From A. T. to 80°C
Conductivity range settings of the rinsing   NA 0 – 200 μS/cm
Noise level < 70 dB < 70 dB
Device control PLC + 5,7“ touchscreen PLC + 8,4“ touchscreen
Traceability Off/In Line Options Options
External rinsing set dimensions (w x l x h) NA Options 1000 x 1500 x 1100 mm 100 litres

 

Category:

Technical Data

Sonix® 355 CRRD  Sonix® 954 CRD Piano
Technical Data
Dimensions (w x l x h) 1360 x 972 x 1243 mm 2342 x 1132 x 1703 mm
Weight  400 kg 740 kg
Ø energy consumption per 1 cycle  1,92 kWh 2,67 kWh
Compressed air consumption per 1 cycle  83 l / 5 Bar 83 l / 5 Bar
Max. dimensions of the cleaned parts  280 x 560 x 570 mm 900 x 470 x 300 mm
Dimensions of mechanical carrier basket 260 x 460 mm 880 x 450 mm
Exchangeable mechanical filter of  fluids  NA 5 – 100 μm
Temperature range setting  cleaning fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting   rinse  fluid From A.T. to 60°C From A.T. to 60°C
Temperature range setting  drying  From A. T. to 90°C From A. T. to 80°C
Conductivity range settings of the rinsing   NA 0 – 200 μS/cm
Noise level < 70 dB < 70 dB
Device control PLC + 5,7“ touchscreen PLC + 8,4“ touchscreen
Traceability Off/In Line Options Options
External rinsing set dimensions (w x l x h) NA Options 1000 x 1500 x 1100 mm 100 litres

 

Sonix®

Sonix is a fully automatic system with two different setups including multi-chamber option. Itś designed to clean all types of conformal coating from coating frames, masks, pallets, parts of the coating line, or PCB.

Sonix® 355 CRRD

     

Sonix® 355 CRRD

Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, coating machine parts of coated PCBs for repair and subsequent coating.All processes are automated and run in 4 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then the operator manually moves the basket with the washed parts to the secondary pre-rinse chamber. The operator then moves the basket to the final rinse chamber and finally to the last drying chamber.All 4 chambers can be used at the same time, which increases the cleaning capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.

Sonix® 954 CRD Piano

     

     

 

Sonix® 954 CRD Piano

Sonix® 954 CRD “Piano” is designed to remove the cured conformal coating from coating frames, coating machine parts or coating PCBs for repair and subsequent coating. In certain cases, Sonix® 954 CRD “Piano” may also be recommended for PCB cleaning or for degreasing metal parts.All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with cleaning liquid and the other with rinsing liquid. The operator puts the parts to be cleaned in the process chamber into the basket, and the cleaning system automatically performs the cleaning, rinsing and drying process.