Description

Category:

Alcohol based

Proton® 21

Proton® 21

Alcohol-based cleaning fluid determined to remove residuesof a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printingReady-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives.Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning

Proton® 23

Proton® 23

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes and most types of SMT adhesives. Ready-mix, intended for direct use.

 

Scheda di Sicurezza Proton 23
Proton® 29

Proton® 29

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes andmost types of SMT adhesives. Ready-mix, intended for direct use.

 

 

Scheda di Sicurezza Proton 29

Proton® 69

Proton® 69

Alcohol-based cleaning fluid for washing stencils, PCB misprints and solder paste and SMT adhesive scraps. Specially developed for washing stencils and pump prints from non-hardened epoxy-based SMT adhesives.Also effective for washing solder pastes. Ready-mix ready to use. Designed for use in all types of washing equipment, especially high-pressure spraying.

Proton® 275

Proton® 275

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Used for epoxide, polyurethane and acrylic coatings.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound

Proton® 532

Proton® 532

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Determined for styrene, acrylic, urethane coating.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound.

Proton® 703

Proton® 703

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Intended specifically for dissolving of silicone coatings, also effective for most types of acrylic coatings.High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the air bubble and ultrasound.

Flux Remover 4

Flux Remover 4

Manual PCB cleaning after the reflow process.Special bristles – with optimal hardness, developed, especially for PCB cleaning. Thanks to the unique material of the fibres, they do not fray and their working life is extended.High evaporation – the remaining fluids will quickly evaporate and the board stays completely dry.

 

 

Scheda di Sicurezza Flux Remover 4
Stencil Cleaner 11

Stencil Cleaner 11

Manual cleaning of print stencils and squeegees. Suitable for the pre-cleaning and cleaning of flux and SMT adhesives from printing stencils and squeegees. Not necessary to rinse after the cleaning process.

 

 

Scheda di Sicurezza Stencil Cleaner 11

 

Other Fluids

DI water

DI water

DCT Deionized water intended for dilution of concentrates of cleaning fluids and as a rinsing medium.

Antifoam

Antifoam

Water dispersible chemical defoaming agent.Recommended areas for use: to knock down the foam in cleaning or rinsing fluid in spray in the air or air bubble cleaning systems.

Isopropyl alcohol

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol or 2-propanol) is a colorless, flammable chemical compound (chemical formula CH3CHOHCH3) with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

 

 

Scheda di Sicurezza Isopropyl alcohol

 

IPA / DI water 75/25

In the ROSE method, a PCB to be tested is submerged in a solution of 75% isopropanol or IPA (but more properly propan-2-ol) and 25% DI water.

 

[/su_button]

 

Scheda di Sicurezza IPA / DI Water 75/25

Water based

 

 

Decotron® 23

Decotron® 23

Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.

 

Scheda di Sicurezza Decotron 23

Decotron® 239

Decotron® 239

Water-based cleaning fluid determined to remove residues of a solder paste and uncured epoxy-based SMT adhesives from printing stencils, PCBs misprints and squeegees. Effective cleaning of process residues (dust, grease) from aluminium parts and plastics with good evaporation properties after cleaning.

Decotron® 250

Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

 

Scheda di Sicurezza Decotron 250

Decotron® 250/25

Decotron® 250/25

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Decotron® 281

Decotron® 281

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron 281

Decotron® T300SA

Decotron® T300SA

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong ready mix intended for heavily polluted parts. Additive against oxidation of aluminium.

 

Scheda di Sicurezza Decotron 300SA

 

Scheda di Sicurezza Decotron 300S

 

Decotron® 331S

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

 

Scheda di Sicurezza Decotron 331S

 

Scheda di Sicurezza Decotron 331S concentrate

 

Decotron® T332

Decotron® T332

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron T332 concentrate

 

Scheda di Sicurezza Decotron T332

 

Decotron® 333 F

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

 

Scheda di Sicurezza Decotron 333 F

Decotron® CP381

Decotron® CP381

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process.Ready-mix, intended for direct use.Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron CP381

 

Scheda di Sicurezza Decotron CP381A

Decotron® T389F

 

Decotron® T389F

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process.

Scheda di Sicurezza Decotron T389

 

Scheda di Sicurezza Decotron T389 concentrate

 

Scheda di Sicurezza Decotron T389F

Decotron® T390

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong mix intended for heavlily polluted parts.

 

Scheda di Sicurezza Decotron T390

 

Decotron® M50

Decotron® M50

A water-based cleaning fluid designed for soldering device. It´s for manual cleaning of low contamination.Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell.

Reflow Cleaner 88

Reflow Cleaner 88

A water-based cleaning fluid designed for soldering device manual cleaning – for high contamination.Ready-mix designed for direct use. Designed for cleaning of most soldering paste and flux types. Developed for areas with strong contamination levels, increased smell, and lower compatibility with aluminium-based alloys.

 

 

.

Scheda di Sicurezza Reflow Cleaner 88

Reflow Cleaner 94

Reflow Cleaner 94

A water-based cleaning fluid designed for soldering device manual cleaning for low contamination. Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.

 

.

Scheda di Sicurezza Reflow Cleaner 94

Alcohol based

Proton® 21

Proton® 21

Alcohol-based cleaning fluid determined to remove residuesof a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printingReady-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives.Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning

Proton® 23

Proton® 23

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes and most types of SMT adhesives. Ready-mix, intended for direct use.

 

Scheda di Sicurezza Proton 23
Proton® 29

Proton® 29

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes andmost types of SMT adhesives. Ready-mix, intended for direct use.

 

 

Scheda di Sicurezza Proton 29

Proton® 69

Proton® 69

Alcohol-based cleaning fluid for washing stencils, PCB misprints and solder paste and SMT adhesive scraps. Specially developed for washing stencils and pump prints from non-hardened epoxy-based SMT adhesives.Also effective for washing solder pastes. Ready-mix ready to use. Designed for use in all types of washing equipment, especially high-pressure spraying.

Proton® 275

Proton® 275

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Used for epoxide, polyurethane and acrylic coatings.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound

Proton® 532

Proton® 532

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Determined for styrene, acrylic, urethane coating.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound.

Proton® 703

Proton® 703

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Intended specifically for dissolving of silicone coatings, also effective for most types of acrylic coatings.High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the air bubble and ultrasound.

Flux Remover 4

Flux Remover 4

Manual PCB cleaning after the reflow process.Special bristles – with optimal hardness, developed, especially for PCB cleaning. Thanks to the unique material of the fibres, they do not fray and their working life is extended.High evaporation – the remaining fluids will quickly evaporate and the board stays completely dry.

 

 

Scheda di Sicurezza Flux Remover 4
Stencil Cleaner 11

Stencil Cleaner 11

Manual cleaning of print stencils and squeegees. Suitable for the pre-cleaning and cleaning of flux and SMT adhesives from printing stencils and squeegees. Not necessary to rinse after the cleaning process.

 

 

Scheda di Sicurezza Stencil Cleaner 11

 

Other Fluids

DI water

DI water

DCT Deionized water intended for dilution of concentrates of cleaning fluids and as a rinsing medium.

Antifoam

Antifoam

Water dispersible chemical defoaming agent.Recommended areas for use: to knock down the foam in cleaning or rinsing fluid in spray in the air or air bubble cleaning systems.

Isopropyl alcohol

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol or 2-propanol) is a colorless, flammable chemical compound (chemical formula CH3CHOHCH3) with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

 

 

Scheda di Sicurezza Isopropyl alcohol

 

IPA / DI water 75/25

In the ROSE method, a PCB to be tested is submerged in a solution of 75% isopropanol or IPA (but more properly propan-2-ol) and 25% DI water.

 

[/su_button]

 

Scheda di Sicurezza IPA / DI Water 75/25

Category:

Alcohol based

Proton® 21

Proton® 21

Alcohol-based cleaning fluid determined to remove residuesof a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printingReady-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives.Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning

Proton® 23

Proton® 23

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes and most types of SMT adhesives. Ready-mix, intended for direct use.

 

Scheda di Sicurezza Proton 23
Proton® 29

Proton® 29

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printing. Effective for all types of solder pastes andmost types of SMT adhesives. Ready-mix, intended for direct use.

 

 

Scheda di Sicurezza Proton 29

Proton® 69

Proton® 69

Alcohol-based cleaning fluid for washing stencils, PCB misprints and solder paste and SMT adhesive scraps. Specially developed for washing stencils and pump prints from non-hardened epoxy-based SMT adhesives.Also effective for washing solder pastes. Ready-mix ready to use. Designed for use in all types of washing equipment, especially high-pressure spraying.

Proton® 275

Proton® 275

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Used for epoxide, polyurethane and acrylic coatings.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound

Proton® 532

Proton® 532

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Determined for styrene, acrylic, urethane coating.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound.

Proton® 703

Proton® 703

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Intended specifically for dissolving of silicone coatings, also effective for most types of acrylic coatings.High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the air bubble and ultrasound.

Flux Remover 4

Flux Remover 4

Manual PCB cleaning after the reflow process.Special bristles – with optimal hardness, developed, especially for PCB cleaning. Thanks to the unique material of the fibres, they do not fray and their working life is extended.High evaporation – the remaining fluids will quickly evaporate and the board stays completely dry.

 

 

Scheda di Sicurezza Flux Remover 4
Stencil Cleaner 11

Stencil Cleaner 11

Manual cleaning of print stencils and squeegees. Suitable for the pre-cleaning and cleaning of flux and SMT adhesives from printing stencils and squeegees. Not necessary to rinse after the cleaning process.

 

 

Scheda di Sicurezza Stencil Cleaner 11

 

Other Fluids

DI water

DI water

DCT Deionized water intended for dilution of concentrates of cleaning fluids and as a rinsing medium.

Antifoam

Antifoam

Water dispersible chemical defoaming agent.Recommended areas for use: to knock down the foam in cleaning or rinsing fluid in spray in the air or air bubble cleaning systems.

Isopropyl alcohol

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol or 2-propanol) is a colorless, flammable chemical compound (chemical formula CH3CHOHCH3) with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

 

 

Scheda di Sicurezza Isopropyl alcohol

 

IPA / DI water 75/25

In the ROSE method, a PCB to be tested is submerged in a solution of 75% isopropanol or IPA (but more properly propan-2-ol) and 25% DI water.

 

[/su_button]

 

Scheda di Sicurezza IPA / DI Water 75/25

Water based

 

 

Decotron® 23

Decotron® 23

Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.

 

Scheda di Sicurezza Decotron 23

Decotron® 239

Decotron® 239

Water-based cleaning fluid determined to remove residues of a solder paste and uncured epoxy-based SMT adhesives from printing stencils, PCBs misprints and squeegees. Effective cleaning of process residues (dust, grease) from aluminium parts and plastics with good evaporation properties after cleaning.

Decotron® 250

Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

 

Scheda di Sicurezza Decotron 250

Decotron® 250/25

Decotron® 250/25

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Decotron® 281

Decotron® 281

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron 281

Decotron® T300SA

Decotron® T300SA

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong ready mix intended for heavily polluted parts. Additive against oxidation of aluminium.

 

Scheda di Sicurezza Decotron 300SA

 

Scheda di Sicurezza Decotron 300S

 

Decotron® 331S

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

 

Scheda di Sicurezza Decotron 331S

 

Scheda di Sicurezza Decotron 331S concentrate

 

Decotron® T332

Decotron® T332

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron T332 concentrate

 

Scheda di Sicurezza Decotron T332

 

Decotron® 333 F

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

 

Scheda di Sicurezza Decotron 333 F

Decotron® CP381

Decotron® CP381

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process.Ready-mix, intended for direct use.Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

 

Scheda di Sicurezza Decotron CP381

 

Scheda di Sicurezza Decotron CP381A

Decotron® T389F

 

Decotron® T389F

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process.

Scheda di Sicurezza Decotron T389

 

Scheda di Sicurezza Decotron T389 concentrate

 

Scheda di Sicurezza Decotron T389F

Decotron® T390

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong mix intended for heavlily polluted parts.

 

Scheda di Sicurezza Decotron T390

 

Decotron® M50

Decotron® M50

A water-based cleaning fluid designed for soldering device. It´s for manual cleaning of low contamination.Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell.

Reflow Cleaner 88

Reflow Cleaner 88

A water-based cleaning fluid designed for soldering device manual cleaning – for high contamination.Ready-mix designed for direct use. Designed for cleaning of most soldering paste and flux types. Developed for areas with strong contamination levels, increased smell, and lower compatibility with aluminium-based alloys.

 

 

.

Scheda di Sicurezza Reflow Cleaner 88

Reflow Cleaner 94

Reflow Cleaner 94

A water-based cleaning fluid designed for soldering device manual cleaning for low contamination. Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.

 

.

Scheda di Sicurezza Reflow Cleaner 94