Decotron® 23

Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.

Decotron® 239

Water-based cleaning fluid determined to remove residues of a solder paste and uncured epoxy-based SMT adhesives from printing stencils, PCBs misprints and squeegees. Effective cleaning of process residues (dust, grease) from aluminium parts and plastics with good evaporation properties after cleaning.

Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Decotron® 250/25

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Decotron® 281

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

Decotron® 331S

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

Decotron® 333 F

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after soldering process

.

Decotron® C55S

Cleaning fluid determined to remove flux residues from PBCs after soldering process.
Ready-mix, intended for direct use.
Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines

• Recommended for use in systems with closed cleaning processes and mechanical filtration
• The fluid is alkaline, rinse with DI water needed
• Eliminates potential foaming of DI-water during the rinsing process of the cleaning machine
• High compatibility with wide range of materials
• Suitable for cleaning of flux residues of clean and no-clean lead and lead-free solder pastes

Decotron® CP381

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process.Ready-mix, intended for direct use.Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

Decotron® CP382

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process.Ready-mix, intended for direct use.Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

• recommended for use in systems with closed cleaning processes and mechanical filtration
• two phase cleaning fluid with foam control ability during cleaning in spray in air machine
• suitable for cleaning of flux residues of clean and no-clean lead and lead-free solder pastes
• the fluid is alkaline, rinse with DI water is necessary
• no flash point, can be heated to increase the cleaning efficiency

Decotron® CP385

Water-based cleaning fluid determined to remove flux residues from PBCs after soldering process. Can be used to clean misprints.
Ready-mix, intended for direct use.
Effective for all types of solder pastes and fluxes, more effective cleaning under components.
Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

• Recommended for use in systems with closed cleaning processes and mechanical filtration
• The fluid is alkaline, rinse with DI water needed
• High compatibility with material and components of the cleaning devices
• Environment-friendly, biodegradable
• Tenzide-free, no solid residues on the surface
• No flash point, can be heated to increase the cleaning efficiency

Decotron® M50

A water-based cleaning fluid designed for soldering device. It´s for manual cleaning of low contamination.Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell.

Decotron® T300SA

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong ready mix intended for heavily polluted parts. Additive against oxidation of aluminium.

Decotron® T332

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

Decotron® T389F

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process.

Decotron® T390

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, soldering furnaces filters and waves after soldering process. Extra strong mix intended for heavlily polluted parts.

Reflow Cleaner 88

A water-based cleaning fluid designed for soldering device manual cleaning – for high contamination.Ready-mix designed for direct use. Designed for cleaning of most soldering paste and flux types. Developed for areas with strong contamination levels, increased smell, and lower compatibility with aluminium-based alloys.

.

Reflow Cleaner 94

A water-based cleaning fluid designed for soldering device manual cleaning for low contamination. Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.

.