DIVISIO 4000

Category:

Enquiry about DIVISIO 4000

Enter the security code shown above

Description

DIVISIO 4000

The DIVISIO 4000 is a unit for high volumes and a small panel spectrum. Arriving panels are transferred to a conveyor where they are lifted up and then picked up by the gripper adapter.
The milling cutter is mounted in a fixed position into the unit and the panel then travels over the cutter. The unloading conveyor can either be a fl at belt conveyor, a double belt conveyor, product carrier, shuttle or a combination of them. A unit with automatic change system for the gripper adapter. The system consists of a moveable store for the adapter and the integrated loading lift. The type of gripper is then detected by a scanner and automatically loaded when the product is changed.

Details DIVISIO 4000

  • Simple manual change of the fixture

 

Function DIVISIO 4000

  1. Product picked up from feed  conveyor with the gripper
  2. Separation of the tabs in the panel
  3. PCBs deposited
  4. Disposal of panel waste

 

NEW HMI SIMPLEX

  • Right hand appliance on touch screen
  • Navigation on right screen side
  • Functions ordered downside on screen
  • Simple and safe fault clearance
  • Combined function sides
  • Large information notifications
  • Same appearance on every ASYS machine

options:

 

 

Technical Data

Technical Data for the DIVISIO 4000

BROCHURE
Machine Confi guration
Transport height 850 mm ± 50 mm
Max. transport width 320 mm
Interface Siemens, SMEMA
Transfer direction From left to right
Operating side Front of the machine
Fixed rail Front of the machine
Panel Dimensions
Panel length to 360 mm
Panel width to 320 mm
Panel thickness 0.8 to 4.5 mm
Panel weight max. 4 kg
PCB weight max. 1.5 kg
Component height, spindle-side 8 mm; partial 18 mm (other height on request)
Component height, gripper-side 40 mm
Installation Requirements
Power supply 400 V, 208V 50 / 60 Hz, ± 10%
Power supply system 3L + N + PE
Fuse protection 3 x C16 A without ELCB
Power consumption 2 kW
Air supply 6 bar
Air consumption 120 Nl/min
Machine Description
Length x Width x Height 1448 x 2229 x 2008 mm
Weight 1250 kg (standard equipped)
Positioning ± 0,015 mm (20°C ±1°C)
Repeatability ± 0,005 mm (20°C ±1°C)
Noise Level < 75 dB(A) (possible deviations due to material mix of the panel)
Upgrades
Machine networking via IC Net

Related products