DIVISIO 5000

Category:

Description

DIVISIO 5000

The DIVISIO 5000/5100 is top of its class in fl exible, highspeed depaneling systems.
The machine is only 1000mm / 1200mm long and has a working area of 330mmx350mm / 460mmx460mm. The modular frame construction leaves enough room for installation of for example a carrier circulating system or an underfl oor conveyor with integrated lift device. The machine consists of 2 lanes which can be confi gured according to the customer’s demands. The PCB panel enters the machine on lane 1 where it is routed and the routed PCBs are subsequently transferred via a gripper to lane 2. The handling gripper axis is made of carbon fi ber reinforced plastic, ensuring high stiffness and accuracy.

Routing module with spindle 500 W

  • Automatic tool exchange with 8-up tool magazine ( at Type 1 ),
    12-up tool magazine (at Type 2 )

 

  • Tool management
    • Break monitoring
    • Length monitoring
    • Diameter control
    • Cutting force monitoring
    • Lifetime monitoring
    • Dynamic ayerage utilization of flute length

 

Function DIVISIO 4000

  1. Product picked up from feed  conveyor with the gripper
  2. Separation of the tabs in the panel
  3. PCBs deposited
  4. Disposal of panel waste

 

NEW HMI SIMPLEX

  • Right hand appliance on touch screen
  • Navigation on right screen side
  • Functions ordered downside on screen
  • Simple and safe fault clearance
  • Combined function sides
  • Large information notifications
  • Same appearance on every ASYS machine

options:

 

 

 

Technical Data

Technical Data for the DIVISIO 5000

BROCHURE
DIVISIO 5000 DIVISIO 5100
Machine Confi guration
Transport height 850 mm ± 50 mm 850 mm ± 50 mm
Max. transport width 330 mm 460 mm
Interface Siemens, SMEMA Siemens, SMEMA
Transfer direction From left to right From left to right
Operating side Front of the machine Front of the machine
Fixed rail Front of the machine Front of the machine
Dimensions
Panel length 70 to 350 mm 70 to 460 mm (508 mm)
Panel width 70 to 330 mm 50 to 460 mm
Panel thickness 0.8 to 5.0 mm
Panel weight max. 4 kg
PCB weight max. 1,5 kg
Component height, spindle-side 8 mm; partial 18 mm (other height on request)
Component height, gripper-side 40 mm
Trays on lane 2 400 x 300 mm 600 x 400 mm
Installation Requirements
Power supply 400 V, 208V 50 / 60 Hz, ± 10%
Power supply system 3L + N + PE
Fuse protection 3 x C16 A without ELCB
Power consumption 3,6 kW
Air supply 6 bar
Air consumption 120 Nl/min
Machine Description
Length x Width x Height 1000 x 2035 x 1688 mm 1200 x 2265 x 1688 mm
With switch cabinet on top (option) 3120 mm 3020 mm
Weight 1800 kg (standard equipped) 1900 kg (standard equipped)
Speed X,Y= 2000 mm/sec, Z= 1000 mm/sec
Acceleration X,Y= 15 m/s², Z= 15 m/s²
Positioning ± 0,02 mm (20°C ±1°C)
Repeatability ± 0,005 mm (20°C ±1°C)
Cut accuracy ± 0,08 mm with Vision System (20°C ±1°C)
± 0,12 mm without Vision System (20°C ±1°C)
Noise Level < 75 dB(A) (possible deviations due to material mix of the panel)

Related products