DIVISIO 4000
The DIVISIO 4000 is a unit for high volumes and a small product mix. Arriving panels are transferred to a conveyor where they are lifted up and then picked up by the gripper adapter. The cutting tool (spindle or saw) is mounted in a
fixed position into the unit and the panel then travels over it. A double spindle can also be installed to increase productivity.
The unloading conveyor can either be a flat belt conveyor, a double belt conveyor, product carrier, shuttle or a combination of them.
Features
_ Linear motors for highest dynamics and accuracy
_ Tool coding
_ Automatic router-bit exchange
_ Quick change adapter system
_ Spring loaded hold down clamp assembly
_ SIMPLEX HMI offers comfortable operation
_ Ionization unit
_ ESD spindle

Options
_ Spindle or saw
_ Offline programming
_ ASYCAM CAD data conversion
_ Dust extraction
_ Camerasystem
+ Fiducial recognition
+ Cut inspection
+ Bad mark recognition
+ Code read
_ MES interface
_ Customized transport modules
Machine configuration
Transport height Max. transport width Interface Transfer direction Operating side Fixed rail |
850mm ±50mm 320mm Siemens, SMEMA From left to right Front of the machine Front of the machine |
Panel Dimensions
Panel length Panel width Panel thickness Panel weight max. PCB weight max. Component height, spindle-side Component height, gripper-side |
up to 360mm up to 320mm 0.8 to 4.5mm 4kg 1.5kg 8mm; partial 18mm 40mm |
Installation requirements
Power supply Power supply system Fuse protection Connection type Power consumption (without suction) Air supply Air consumption |
400V, 208V 50/60Hz, ±10% 3L + N + PE 3x C32 A Fixed connection 0.9kW 6bar 120Nl/min |
Machine description
Length x Width x Height Weight Positioning Repeatability Noise Level |
1448 x 2229 x 2008mm 1250kg (standard equipped) ±0.015mm (20°C ±1°C) ±0.005mm (20°C ±1°C) < 75dB(A) |