|

Description
Technical data

Technical data

VEGO Compact	VEGO Dynamic
Flip Station
BFS 01	WS 01 WS 01Q
BFS 01	WS 01 WSQ 01
Turning Table
BTT 01	AEM 02
BTT 01	AEM 02 Presentation
Standard features Transport height 950 mm +/-50 mm SMEMA interface ESD conveyor belts conform to IEC61340-5-1 3 mm edge support Format size 70 – 460 mm (length) x 50 – 460 mm (width) Conveyor speed ~ 20 m/min. PCB weight up to 3 kg. Transport direction Left – Right (fix rail front) Color “Basic light”	Standard features Transport height 850 mm +/-50 mm SMEMA interface ESD conveyor belts conform to IEC61340-5-1 3 mm edge support Format size 70 – 460 mm (length) x 50 – 460 mm (width) Conveyor speed ~ 20 m/min. PCB weight up to 3 kg. Transport direction Left – Right (fix rail front) Color “Basic light”
Options Electrical width adjustment Automatic width adjustment Transport height 850 mm ± 50 mm Safety cover with lock Transport direction from right to left	Options Transport height 950mm +/- 50mm Magazine adaptation Multiple output Re-insertion mechanism Hybrid magazine Electric width adjust Automatic width adjust Dual-lane operation PCB weight up to 6kg Equipment for thin PCBs (<0.7mm) Transport direction from right to left input/output conveyor

VEGO Compact

VEGO Dynamic

Flip / Turning

BFS 01 / BTT 01 Flip / Turner Table

WS 01 / AEM 02 Flip / Tuner Table, T-Controller

FLIP SYSTEM

BFS 01 Flip Station

WS 01 Flip Station

WSQ 01 Flip Station

The Flip Station is used to invert PCBs 180°. This flip function will change the leading and trailing edge. The incoming PCB is mechanically stopped on the conveyor system and flipped over by a rotating system. After completion of the process the PCB is offloaded to the downstream system.

Pneumatic Flip mechanism
Transport height 950 mm +/-50 mm
180° Flip Function
Pass-through
Start-Stop push button
ESD conveyor belts

OPTIONS

Transport height 850 mm ± 50 mm
Electrical width adjustment
RAL Color
In-/outlet conveyor 530 mm with cover

UPGRADES

Control panel
Automatic width adjustment a)
Additional interface protocol (Siemens)
Machine networking via IC-Net
Light tower with buzzer

a) only in combination with Control panel

The WS01 is used to flip PCBs in production lines for backside assembly or marking. The PCB are halted with a stopper and the complete transport mechanism flips around 180° in the direction of transport.
The PCB is subsequently handed over to the downstream machine.

Functions / Setups

Flip 180°
Pass through

Flip axis in base position 0°

Axis flips 180°

Handover the PCB to n+1

Additional setups (optionally)

Automatically turn (controlled by external signal)
LP-withdrawal (Double turn)

OPTIONS

Transport height 950mm +/- 50mm
Automatic width adjust
Automatic pass-through/flip mode
Inlet/outlet conveyor
Safety shutter at the inlet and/or outlet
Equipment for thin PCBs (< 0.7mm)
PCB weight up to 6kg
PCB take-back function

The WSQ 01 is used to flip PCBs in production lines in 180° across the transport direction.

Adjusted for fix PCB width size
Servo driven axis
Flip procedure in both directions (0° and 180°) allows short cycle time.
Cycle time < 12 sec

OPTIONS

Variable PCB width can be realized with electrical and automatic width adjustment
During the flip procedure both conveyor rails are shifting sideways depending on PCB width. (Fix rail change)
Cycle time < 12 – 18 sec. Depending on PCB width.

TURNING SYSTEM

BTT 01 Turn Table

AEM 02 Turn Table, T-Controller

The Turn Table is typically located in a SMD line which requires a 90 degree turn or a sorting function.

Up to three transfer sides
Pneumatic rotation
Transport height 950 mm +/-50 mm
ESD conveyor belts
In-/outlet conveyor 530 mm with cover
Start-Stop push button

OPTIONS

Transport height 850 mm ± 50 mm
Electrical width adjustment
Pass through
Good/bad sorting
RAL Color
In-/outlet conveyor 530 mm with cover b)

b) max. two loading/unloading conveyors

UPGRADES

Control panel

Automatic width adjustment a)

Width adjustment by spindles electrically driven (option)

Width adjustment by clamping lever (Standard feature)

Width adjustment by spindles electrically driven (option)

Additional interface protocol (Siemens)
Machine networking via IC-Net
Light tower with buzzer

a) only in combination with Control panel

The AEM 02 is used for changing the direction in production lines. Subsequently, it can also be used to split or combine lines. The integrated rotating and linear drive means that the system provides you with great flexibility. The machine is based on a stable steel tubing system which can support up to 4 additional inlet/outlet conveyors.
The assembly is taken over onto the inlet conveyor and depending on the selected operating mode, is either turned or transported in a straight line through the machine to the corresponding downstream system.