VEGO Compact |
VEGO Dynamic |
Loader / Unloader for stack |
Loader / Unloader for stack |
|
|
LOADING SYSTEM
|
BDS 01 Bare Board Destacker
|
LSB 03 Bare Board Destacker
|
The Bare Board Loader separates PCBs from a stack and feeds them to the production line, by dropping the bottom PCB onto a conveyor belt.
- Separation by pneumatic moving metal bar
- ESD conveyor belts
- SMEMA Interface
- Start-Stop push button

OPTIONS
- Transport height 850 mm ± 50 mm
- Electrical width adjustment
- Pass- through
- RAL Color
UPGRADES
- Control paneL
- Automatic width adjustment a)
- Additional interface protocol (Siemens)
- Machine networking via IC-Net
- Light tower with buzzer
- Cover
a) only in combination with Control panel
|
The stack is processed from above which ensures gentle separation of the PCBs. The machine can be equipped with various methods of separation depending on the type of PCB used.
OPTIONS
- Transport height 950mm +/- 50mm
- Automatic width adjust
- Pass-through and mix-mode (automatic switchover)
- Combined clamping/vacuum head
- Loading head for stack
- Foil removing
- Pre-warning limit alarm for stack empty
- Inlet/outlet conveyor
- Loading lift for magazines
- Centre support for flexible PCBs
- Equipment for thin PCBs (<0.7mm)
- Flexible Stack Loader
|
LLB 01 Multiple FIFO Destacker |
OPTIONS
- Transport height 950mm +/- 50mm
- Automatic width adjustment
- Equipment for thin PCBs (<0.7mm)
- Combined clamping/vacuum head
|
The logistics loader LLB 01 is used to load marking stations or SMT production lines with bare PCBs. It combines a buffer station for PCB batches and a separator station in one unit. The system is designed for correctly sorted separation of the PCB batches according to the FIFO principle. They are stored mechanically isolated from each other until the separation process. This prevents the possibility that individual circuit boards of various cha rges may be mixed up. The PCB packages are manually inserted into the system and buffered. Then they are fed to the separator station. During the separation process, the stack is processed from the top down. Hence the separation process is independent from the stack weight, making it very gently for the product.
|