• BLO 01 / BUL 01   > 1 magazine
• BLO 03 / BUL 03   > 2 magazines
• BLO 04 / BUL 04   > 3 – 5 magazines

• AES 01 / AMS 01   > 1 magazine
• AES 03 / AMS 03   > 2 magazines
• AES 04 / AMS 04   > 4 – 6 magazines
• AES 05 / AMS 05   > 7 magazines
• AES 06 / AMS 06   > 8 magazines
• AES 07 / AMS 07   > 10 magazines

LOADING SYSTEM

BLO 01 Line Loader for one magazine

AES 01 Line Loader for one magazine

• Electrical pusher with force limiter
• Two point magazine clamping system
• Transport height 950 mm +/-50 mm
• Control panel with LC-Display
• Light tower, single stage with buzzer
• Extractor arm manually adjustable

OPTIONS

• Transport height 850 mm ± 50 mm
• RAL Color
• Transport direction Right – Left

UPGRADES

• Additional interface protocol (Siemens)
• Machine networking via IC-Net

• One magazine loader
• Only vertical table movement for added safety
• Magazine table with quick release clamping units,
  horizontally and vertically
• PCB cycle time is 5 seconds
• Can perform as a combination module
  ( => Load / Unload)
• One machine, two functions

OPTIONS

Kombi insertion / extraction

• The LP which can be worked on is taken with the extractor out of the magazine and supplied to the following machine.
• After phase of operation the LP is supplied to a magazine by the inserter again.

BLO 03 Line Loader for two magazines

AES 03 Speed – Automatic Line- Loader for magazines

• Electrical pusher with force limiter
• Pneumatic side shuttle
• Magazine capacity: 2
• Transport height 950 mm +/-50 mm
• Control panel with Display
• Light tower, single stage

OPTIONS

• Transport height 850 mm ± 50 mm
• RAL Color
• Electrical width adjustment
• Transport direction Right – Left

UPGRADES

• Automatic width adjustment
• Additional interface protocol (Siemens)
• Machine networking via IC-Net

• Lifting table with quick clamping system for the magazines, with vertical fixation
• Average cycle time per PCB 13,5 sec. (9 – 15)
• Magazine exchange during run-mode allows a non-stop production
• Excellent accessibility of the magazines
• Smallest footprint

Functionality

• Unloading the magazines by starting from the top
• Magazine positions and handover position are freely programmable
• Product memory function for 200 recipes
• Graphical color display with touch- function
• Operator guidance on 4 levels
• Optional: Automatic magazine handover and takeover with interface to robot

BLO 04 Line Loader for three to five magazines

AES 04 Loader – Multiple Magazine Line

Line Loader loads PCBs from magazines into the production
line. It is equipped with an automatic magazine change for a
quasi-continuing production process. It can easily be adapted
to any magazine size. 3 to 5 magazines can be loaded in a row.
The machine consists of a loading and unloading conveyor
for magazines, a lifting axis with a magazine platform and an
electrically-driven extractor. The extractor pushes the PCB out
of the magazine and into the next system.

• Electrical pusher with force limiter
• two point magazine clamping system
• Automatic magazine change
• Magazine capacity: 3 to 5 (regarding size)
• Transport height 950 mm +/-50 mm
• Control panel with Display
• Light tower, single stage

OPTIONS

• Transport height 850 mm ± 50 mm
• RAL Color
• Safety shutter at outlet
• Outlet conveyor
• Transport direction Right – Left
• Electrical width adjustment a)
  a) only in combination with outlet conveyor

UPGRADES

• Automatic width adjustment
• Additional interface protocol (Siemens)
• Machine networking via IC-Net

OPTIONS

• Transport height 950 mm ± 50 mm 
• Magazine adaptation
• Shutter at outlet a)
• Outlet conveyor with safety cover a)
• Electric or automatic width adjustment b)
• Multiple output
• Re-insertion mechanism b)
• Universal magazine clamp b)

UPGRADES

• Automatic magazine change with magazine
  clamps at the top and the bottom
• Loading and unloading conveyers situated on
  top of each other
• PCB buffer conveyor b)
• Electrical width adjustment for pusher
• Touchscreen color display
• LED towerlight and buzzer

a) Only for Type 1
b) Only for Type 2

AES 05 Loader – Multiple Magazine Line

•  high capacity of up to 5 magazines
•  automatic magazine exchange
•  loading and unloading track for magazines on one
•   level
•  automatic magazine clamping
•  cycle time: <8 sec.
•  magazine exchange: <24 sec.
•  Reload new magazine during operation

Technical specifications

The unit consists of a loading and an unloading conveyor for
magazines, a lifting axle with a magazine platform, a transfer
conveyer to the following unit and an electrically driven pusher.
The conveyorsfor the Magazines are situated next to each
other on the samelevel.
The magazines are loaded onto the lower conveyor and
transported into position on the magazine platform. From this
position the PCB’s are extracted. The empty magazine is then
transported back on the parallel conveyor and stored until
manually removed.

OPTIONS

• Transport height 950 mm ± 50 mm
• Magazine adaptation
• Electric width adjustment
• Automatic width adjustment
• Multiple output
• Reinsertion mechanism
• Universal magazine clamp
• Automatic magazine opening device
• Magazine pitch control device

UPGRADES

• Automatic magazine change with magazine
  clamps at the top and the bottom
• Loading and unloading conveyors situated next to each other
  on the same level.
•  Manual insertion of PCB’s on board destacker
• Transfer height for magazines is the same on both
  conveyors
• Double lift axis guide

AES 06 Loader – Multiple Magazine Line

AES 07 Loader – Multiple Magazine Line

• high capacity of up to 5 magazines
• automatic magazine exchange
• loading and unloading of magazines on two levels
• automatic magazine clamping
• cycle time: <8 sec.
• magazine exchange: <18 sec.
• Reload new magazine during operation
• no downtime due to empty magazines
• Configuration with integrated bareboard loading  system 
• Mixed operation modes: PCB from stack and/or from magazine 

Technical specifications

• high capacity of up to 6 magazines
• loading and unloading of magazines on two levels
• two separate magazine tables
• automatic magazine exchange
• double rail operation possible
• division function
• cycle time: <8 sec.
• magazine exchange: 18 sec.
• Reload new magazine during operation
• no downtime due to full magazines

Technical specifications

UNLOADING SYSTEM

BUL 01 Line Unloader for one magazine

AMS 01 Line Unloader for one magazine

Loader with a lift axis for one magazine. This system is used to load PCBs from a magazine into a production line. The unit uses an electrical extractor to load PCBs from a magazine to the downstream system.
Magazine needs to be changed manually. The powder coated steel frame ensures process stability and excellent durability Electrical pusher with force limiter

• Two point magazine clamping system
• Transport height 950 mm +/-50 mm
• Control panel with LC-Display
• Light tower, single stage with buzzer
• SMEMA Interface
• ESD conveyor belts

OPTIONS

• Transport height 850 mm ± 50 mm
• Electrical width adjustment
• Good/bad sorting
• Error loop
• Stopper cylinder
• RAL Color
• Transport direction Right – Left

UPGRADES

• Automatic width adjustment
• Additional interface protocol (Siemens)
• Machine networking via IC-Net

The unit receives PCB’s from the previous unit on an integrated conveyor. An electrically driven pusher then slides the PCB’s into the magazine which is clamped onto the magazine platform. The magazines are changed manually

• One magazine unloader
• Only vertical table movement for added safety
• Magazine table with quick release clamping units,
  horizontally and vertically
• PCB cycle time is 5 seconds
• Microprocessor control with – line LC display
• User guidance and error message by display

OPTIONS

• Magazine adaptation
• Electric width adjustment
• Automatic width adjustment
• Multiple insertion
• Universal magazine clamp
• Control function on inlet conveyor
• Hybrid magazine

UPGRADES

• Magazine platform vertically aligned using a tension clamp
• Sensor recognition of magazine change and automatic
  reset
• Adjustable pusher in the middle of the magazine
• Safety switch on input of PCB into magazine

BUL 03 Line Unloader for two magazines

AMS 03 Speed – Automatic Line- Unloader for magazines

• Electrical pusher with force limiter
• Pneumatic side shuttle
• Magazine capacity: 2
• Transport height 950 mm +/-50 mm
• Control panel with Display
• Light tower, single stage with buzzer

OPTIONS

• Transport height 850 mm ± 50 mm
• Electrical width adjustment
• Good/bad sorting
• Error loop
• Stopper cylinder
• RAL Color
• Transport direction Right – Left

UPGRADES

• Automatic width adjustment
• Additional interface protocol (Siemens)
• Machine networking via IC-Net

• Unloading station for 2 PCB magazines (optionally 3 or 4)
• Magazine movement by vertical axis only
• Magazine loading by pusher mechanism, mounted on shuttle unit
• Lifting table with quick clamping system for the magazines, with vertical fixation
• Cycle time per PCB 11 – 15 sec.
• Magazine exchange during run-mode allows a non-stop production
• Excellent accessibility of the magazines
• Small or wide design
• smallest footprint

Functionality

• Unloading the magazines by starting from the top
• Magazine positions and handover position are freely programmable
• Product memory function for 200 recipes
• Magazine memory for 5 different magazines
• Graphical color display with touch- function
• Operator guidance on 4 levels

BUL 04 Line Unloader for three to five magazines

AMS 04 Unloader – Multiple Magazine Line

The Line Unloader BUL 04 is used to automatically unload PCB‘s from an SMT-production line into magazines. It is equipped with an automatic magazine change for a continuing production process. It can easily be adapted to any magazine size. 3 to 5 magazines can be loaded in a row.
The machine consists of a loading and unloading conveyor for magazines, a lifting axis with a magazine platform and an inlet conveyor with electrically-driven pusher. Arriving PCB‘s are taken over onto the inlet conveyor and then into the magazine.
The electrically-driven pusher pushes the PCB completely into the magazine.

• Electrical pusher with force limiter
• two point magazine clamping system
• Automatic magazine change
• Magazine capacity: 3 to 5 (regarding size)
• Transport height 950 mm +/-50 mm
• Control panel with Display
• Light tower, single stage

OPTIONS

• Transport height 850 mm ± 50 mm
• RAL Color
• Error loop
• Stopper cylinder
• Transport direction Right – Left

UPGRADES

• Automatic width adjustment
• Additional interface protocol (Siemens)
• Machine networking via IC-Net

OPTIONS

• Transport height 950 mm ± 50 mm 
• Magazine adaptation
• Shutter at outlet a)
• Outlet conveyor with safety cover a)
• Electric or automatic width adjustment b)
• Multiple insertion
• Re-insertion mechanism b)
• Universal magazine clamp b)

UPGRADES

• Automatic magazine change with magazine
  clamps at the top and the bottom
• Loading and unloading conveyers situated
  directly one above the other
• PCB buffer conveyor with el. pusher and cover
• Electrical width adjustment for pusher
• Touchscreen color display
• LED towerlight and buzzer

a) Only for Type 1
b) Only for Type 2

AMS 05 Unloader – Multiple Magazine Line

•  high capacity of up to 5 magazines
•  automatic magazine exchange
•  loading and unloading track for magazines on one
•   level
•  automatic magazine clamping
•  cycle time: <8 sec.
•  magazine exchange: <24 sec.
•  Reload new magazine during operation

Technical specifications

The unit consists of a loading and an unloading conveyor for magazines, a lifting axle with a magazine platform, a transfer
conveyer to the following unit and an electrically driven pusher.
The conveyorsfor the Magazines are situated next to each
other on the samelevel.
The magazines are loaded onto the lower conveyor and
transported into position on the magazine platform. From this
position the PCB’s are extracted. The empty magazine is then
transported back on the parallel conveyor and stored until
manually removed.

OPTIONS

• Transport height 950 mm ± 50 mm
• Magazine adaptation
• Electric width adjustment
• Automatic width adjustment
• Multiple output
• Reinsertion mechanism
• Universal magazine clamp
• Automatic magazine opening device
• Magazine pitch control device

UPGRADES

• Automatic magazine change with magazine
  clamps at the top and the bottom
• Loading and unloading conveyors situated next to each other
  on the same level.
• Transfer height for magazines is the same on both
  conveyors
• Double lift axis guide

AMS 06 Loader – Multiple Magazine Line

AMS 07 Loader – Multiple Magazine Line

• high capacity of up to 5 magazines
• automatic magazine exchange
• loading and unloading of magazines on two levels
• automatic magazine clamping
• cycle time: <8 sec.
• magazine exchange: <20 sec.
• Reload new magazine during operation

Technical specifications

• high capacity of up to 6 magazines
• loading and unloading of magazines on two levels
• two separate magazine tables
• automatic magazine exchange
• double rail operation possible
• automatic magazine clamping
• Sorting function possible (Option)
• cycle time: < 10 sec.
• magazine exchange: ~ 20 sec.
• Reload new magazine during operation

Technical specifications