Cyber Optics QX150



2D AOI – Tabletop with In-Line Performance


QX150™ – All-New SIM with Enhanced Illumination
The QX150TM is powered by an all-new SIM (Strobed Inspection
Module) with enhanced illumination – designed to deliver true, in-line inspection performance. The SIM enables on-the-fly inspection making the QX150TM the fastest tabletop ever at 150 cm2/sec.
A higher sensor resolution (12 μm) offers crisp and clear images for
more accurate defect review. And, as always, the SIM is calibration-free.


CyberOptics’ AI2 (Autonomous Image Interpretation) technology is designed for both low volume high mix, and high volume low mix  Applications, and builds on the proven success of our Statistical  appearance Modeling technology. AI2 is all about keeping it simple – no parameters to adjust or algorithms to tune.
And, you don’t need to anticipate defects or pre-define variance either – AI2 does it all for you.

01005 component size inspection capaility

Just draw a box, show a few good examples and you are ready to inspect just about anything. Simply add good examples to the Ai2 model and the false call rates reduce significantly providing a very robust inspection solution.

Components Inspected/ Detected


AI2 Software: Unique Image Processing Technique

With AI2 technology, programming gets even faster – with a 90% reduction in examples required to create a complete production ready programme – you will achieve superior defect detection and low false call rates even with just one example. This means significantly lower tuning time and quality results with one panel inspection. Perfect for those high-mix or low volume applications!

Intelligent Ranking of Examples

With its unique ability to ‘ignore’ bad examples in a model, AI2 offers
precise discrimination even with excessive variance and minimizes
effects of outlier examples. Plus, it is a lot simpler with full support for
unsupervised and semi-automatic model training. And, examples are
pre-sorted so you can select and clear the ones you don’t need – very quickly. The pixel marking feature highlights defective spots, so you can identify genuine defects instantly.

Active Pixel Marking


CyberReport™ A Complete SPC Solution

Provides full-SPC solution with historical analysis and reporting tools with complete traceability. Effective process verification and control to improve yields.




Technical Data

Technical Data for the Cyber Optics QX150TM

Inspection Capabilities  QX150  QX150-M
Inspection Speed  150 cm2/sec (23.25 in.2/sec)
Minimum Component Size  0402 mm (01005 in.)
Board Length 50 mm to 330 mm (2.0 to 13.0 in.)  50 mm to 510 mm (2.0 to 20.0 in.)
Board Width 50 mm to 320 mm (2.0 to 12.5 in.) 50 mm to 320 mm (2.0 to 12.5 in.)
Component Height Clearance (max)  35mm
Lead Pitch  0.3 mm
Component Types Inspected Standard SMT (chips, J-lead, gull-wing, BGA, etc.), through-hole, odd-form, clips, connectors, header pins, and more
Component Defects Missing, polarity, tombstone, billboard, flipped, wrong part, gross body and lead damage, and more
Solder Joint Defects Solder bridge, opens, lifted leads, wettability, excess and insufficient solder, debris, and more
Other Defects Gold-finger contamination, pin-in-hole, bent pins, debris, and many others
Component Measurement Categories Component X, Y position and Rotation
Vision System
Imagers 80 Megapixel Sensor
Image Transfer Protocol PCIe
Lighting Strobe White Light (with dark/bright field)
Resolution 12 μm pixel size
Image Processing Statistical Appearance Modeling (SAM™ ) Technology. Option: Autonomous Image Interpretation (AI²) Technology
Programming Simple online or offline
CAD Import Any column separated text file with ref designator, XY, Angle, Part no info; Valor process preparation
System Specifications
Machine Interface SMEMA, RS232 and Ethernet
Power Requirements 100-120 VAC or 220-240 VAC, 50/60Hz, 2 amp max.
System Dimensions 867 x 756 x 622 mm 1250 x 756 x 622 mm
Barcode Reader, Rework station, SPC Software, Alignment Target, Light Curtain Sensor