INSIGNUM 1000 Scan
The Reading System, INSIGNUM 1000 Scan, is a conveyor with manually adjustable scanner axis. The product is transported on the conveyor and can be transported up against a
stopper. The optional scanner which is mounted on a manually adjustable X/Y-axis is triggered and then transfers the data directly to an external system. After the scanning process, the product is transported to the following unit.

Options
_ Electrical width adjustment
_ Automatic width adjustment
_ Double track operation
_ Inspection mode
_ Good/bad sorting
_ Manual scanning axis from top
_ Manual scanning axis from bottom
_ Electrical scanning axis from top
_ Electrical scanning axis from bottom
Machine configuration
Transport height Max. transport width Interface Scan area above Scan area below Transfer direction Operating side Fixed rail |
920 mm ± 50 mm 460 mm ( Conveyor) SMEMA, all common interfaces (320 or 390 or 460) × 460 mm (250 or 320 or 460) × 460 mm From left to right / from right to left Front of the machine Front of the machine |
Panel Dimensions
Panel length Panel width Panel thickness Panel weight |
70 to 460 mm (Conveyor) 50 to 460 mm 0.8 to 4.0 mm Up to 3 kg |
Installation requirements
Power supply Power supply system Power consumption Air supply Air consumption |
230 V / 115 V, 50 / 60 Hz, ± 10 % L1 + N + PE 0.31 kW 6 bar 3 Nl/min |
Machine description
Length × width × height Codes Weight Noise level |
530 × 1266 × 945 mm for all common 2D Codes, 1D Codes Approx. 90 kg | Approx. 110 kg | Approx. 140 kg < 75 dB |
Upgrades
Machine networking via IC Net