INSIGNUM 4000 Laser
The INSIGNUM 4000 is the all-rounder in the field of PCB marking for the traceability process. The machine is optimally suited for the inline process in your SMT line and achieves shortest cycle times at highest precision. The code sizes of only 1.3mm edge length are marked with a precision of 100µm@5Sigma on the smallest area. Marking speeds of 0.7 seconds including positioning and verification are achieved. With our intuitive SIMPLEX interface, you can create new programs easily and quickly in no time at all.
In order not to interrupt the production process, the system is programmed via our INSIGNUM offline tool. If several INSIGNUM systems are in use in your production, they can be networked with each other and setup times are reduced. The system also sets a benchmark in the flexibility of board formats.
Marking and turning up to 508mm is no problem for the system as well as the processing of thin LPs up to 0.5mm. Connections to MES/ERP systems are possible as well as the use of standardized interfaces from ASYS.

Options
_ Integrated flip-station
_ Loader and unloader controlled by the INSIGNUM 4000 Laser
_ Fibre laser
_ Exhaust system
_ OPTIMAP – Automatic field mapping for cycle time optimization
_Trial & Check
Machine configuration
Transport height Max. transport width Interface Transfer direction Operating side Fixed rail |
920 mm ± 50 mm 508 mm SMEMA From left to right / from right to left Front of the machine Front of the machine |
Panel Dimensions
Panel length Panel width Panel thickness Panel weight Component height Coating |
70 to 508 mm |
Installation requirements
Power supply Power supply system Power consumption Air supply Air consumption |
230 V / 115 V, 50 / 60 Hz, ± 10 % L1 + N + PE 0.69 kW 6 bar <12 Nl/min |
Machine description
Length × Width × Height Max laser window Codes Positioning accuracy Noise Level |
830 × 1565 × 1550 mm 80 × 80 mm Data Matrix ECC200 (Cellsize ≥ 0.127 mm ≥ 5 mil), Code 39, Code 128, 2/5 Interleaved ± 0.15 mm@5Sigma < 75 dB |
Upgrades
Machine networking via IC Net