INSIGNUM 3000 Scan

The scan module INSIGNUM 3000 is used to transfer data in a production line and thus significantly supports the traceability process. A scanner mounted on a motorized X/Y axis system verifies the codes. Depending on the requirements, the data is transferred to an MES system or to the following process plant. Here Asys offers both standard interfaces and customer-specific solutions. In order to reduce set-up times, the system can be connected to other INSIGNUM systems, allowing the machine to access common product data (Product Pool). Furthermore, our SIMPLEX user interface makes operation easier. Based on your requirements, you can choose whether to verify only one code or several codes. The installation of motorized X/Y axes at the top and bottom increases flexibility in production. If codes have to be verified on both sides, the process is carried out in parallel. Thus cycle times can be saved.


_ Automatic width adjust
_ X-Y stepper motor axes above
_ X-Y stepper motor axes below
_ Offl ine Programming
_ MES/ERP connection

Machine configuration

Transport height
Max. transport width
Scan area above
Scan area below
Transfer direction
Operating side
Fixed rail
920 mm ± 50 mm
460 mm ( Conveyor)
SMEMA, all common interfaces
from 300 × 400 mm to 460 × 460 mm
from 260 × 400 mm to 460 × 460 mm
From left to right / from right to left
Front of the machine
Front of the machine

Panel Dimensions

Panel length
Panel width
Panel thickness
Panel weight
70 to 508 mm
50 to 460 mm
0.8 to 4.0 mm
To 3 kg

Installation requirements

Power supply
Power supply system
Power consumption
Air supply
Air consumption
230 V / 115 V, 50 / 60 Hz, ± 10%
L1 + N + PE
0.34 kW
6 bar
5 Nl/min

Machine description

Length × width × height
Noise level
530 × 950 × 1165 mm
Approx. 275 kg
< 75 dB

Reading Systems

Presentation Download