Enquiry about INSIGNUM 1000 TS
Enter the security code shown above
INSIGNUM 1000 Label
The labelling unit, INSIGNUM 1000 Label, is mounted on an X/Y axle system and can be positioned manually. The label
content can be defined and is applied at a fixed position on the PCB. Various label layouts can be saved and then pulled
and activated with the unit software. By entering an identity number, the corresponding program is loaded. The PCB is
positioned using a stopper and side clamps.
Options
_ Offline programming
_ Database integration and network connection
_ Traceability
Features
_ PC controlled unit
_ Windows operator guidance
_ Barcodes and data-matrix labels
_ Thermal transfer printer
_ ASYS label software for creating labels
Machine configuration
| Transport height Max. transport width Interface Transfer direction Operating side Fixed rail |
850 mm ± 50 mm 460 mm Siemens, SMEMA From left to right / from right to left Front of the machine Front of the machine |
Panel Dimensions
| Panel length Panel width Panel thickness Panel weight |
70 to 460 mm 50 to 460 mm 0.8 to 4.0 mm Up to 3 kg |
Installation requirements
| Power supply Power supply system Power consumption Air supply Air consumption |
230 V / 115 V, 50 / 60 Hz, ± 10 % L1 + N + PE 0.4 kW 6 bar <10 Nl/min |
Machine description
| Length × width × height Weight Noise level |
1060 × 875 × 1630 mm Approx. 262 kg < 75 dB |
Upgrades
Machine networking via IC Net