VEGO Dynamic AES 07 & AMS 07
Do you have extremely large, small or flexible printed circuit boards? You only need a simple conveyor belt or a complex automation solution?
No problem. Our handling modules adapt to your production and your product thanks to a wide range of options!
The unit consists of two loading and two unloading conveyors for magazines, two independent lifting axles with magazine platforms, a transfer conveyor with shuttle mechanism to the following unit and an electrically driven pusher. The unloading conveyors are situated parallel to each other on the lower level
and the loading conveyors are situated directly above. The Magazines are transported over the loading conveyor and clamped in place. The pusher then slides the PCB’s into the magazine.
The empty magazine is then transported over the lower (unloading) conveyor and stored until manually removal. The line unloader AMS 07 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of two loading and two unloading conveyors for magazines, two independent lifting axles with magazine platforms, a transfer conveyor with shuttle mechanism to the previous unit and an electrically driven pusher. The unloading conveyors are situated parallel to each other on the lower level and the loading conveyors are situated directly above. The magazines are transported over the loading conveyor and clamped in place. The pusher then slides the PCB’s into the magazine. The full magazine is then transported over the lower (unloading) conveyor and stored until manual removal.
