Home 5 Prodotti 5 InJet® 888 CRD-2F

InJet® 888 CRD-2F

InJet® 888 CRD-2F for removing flux residues from solder frames or for maintenance.

The InJet® 888 CRD-2F is developed primarily for the removal of smelting residues from soldering frames, and the maintenance cleaning of soldering equipment components.
The 2F designation refers to a 2-floor solution. This feature enables the user to be cleaning a large volume of small to mid-sized parts.
The equipment can be easily transformed into a 1-floor system by the removal of the middle rotation arm, enabling the operator to clean large parts.
The cleaning system can be used for cleaning of PCBAs, misprints, and stencils and conformal coating frames cleaning.
The InJet® 888 CRD – 2F is a 100% closed-lo op system which includes cleaning, rinsing and drying technologies. All of the processes are fully automated, and take place in one process chamber.

To facilitate its positioning in the production area is placed on wheels.
With the carbon and resin filters, it can control the ionic contamination of pre rinsing and final rinsing ID water up to 1 uS/cm.
All washing processes can be monitored and archived.

Technical specifications

  • Dimensions: (l x l x h) 1620 x 1350 x 2350 mm
  • Weight: 680 kg
  • Energy consumption per cycle: 3,3 kWh
  • Cleaning and rinsing fluid consumption per cycle: 0,2 – 0,5 l
  • Compressed air consumption per cycle: 1500 l/cycle 4,5 bar
  • Max. dimensions of the cleaned parts: 850 x 800 x 600 mm
  • Exchangeable mechanical filter of cleaning and rinsing fluid: 5 – 200 μm
  • Operating pressures frequency converter: 2,4 Bar
  • Cleaning fluid flow rate: 210 l/min
  • Temperature range setting of the cleaning and rinsing fluid: From ambient temperature to 60°
  • Conductivity range settings of the rinsing fluid in the tanks: 0 – 2000 μS/cm * optional
  • Temperature range setting of the drying: From ambient temperature to 80°C
  • Noise level: < 70
  • Device control PLC + touchscreen PLC: 8,4“
  • Volume of the storage tanks: 85 l

* Maximum dimension in operation condition

Vuoi maggiori informazioni sui nostri prodotti?